[ROM][Unofficial][pdx225][13] Lineage 20 For SONY XPERIA 10IV [SUPER EARLY BETA]...

LineageOS is a free, community built, aftermarket firmware distribution of Android 13, which is designed to increase performance and reliability over stock Android for your device.

LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

All the source code for LineageOS is available in the LineageOS GitHub repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. You can also view the Changelog for a full list of changes & features.

Basic requirements:

• Unlock your bootloader, make sure you are on Android 13 firmware.
• Make sure you can send and receive SMS and receive calls (also via WiFi and LTE, if possible). It would be better for you to get VoLTE/VoWiFi utilized once on stock to provision IMS
• Currently tested on XQ-CC54 (If it does not work, please report below)
• Make sure you have gone through the installation guide once before proceed!

Installation:

Extract the rom and the extract the payload and the continue with steps below (note usb does not work in recovery yet so transfer rom to sdcard)

1. Flash additional partitions and recovery.
   • Download the following files from the download link:
     • dtbo.img
     • vendor_boot.img
     • boot.img
   • Connect your device to your PC via USB if isn't already
   • If your device is not already in fastboot mode, on the computer, open a command prompt (on Windows) or terminal (on Linux or macOS) window, and type:
     
     adb reboot bootloader
   • Flash the downloaded image files to your device by typing:
     
     fastboot flash dtbo <dtbo>.img
     fastboot flash vendor_boot <vendor_boot>.img
     fastboot flash boot <boot>.img
   • Now reboot into recovery to verify the installation:
     
     fastboot reboot recovery
2. Installing LineageOS from recovery
   • Download the lineageos installation package that you would like to install from the download link
   • If you are not in recovery, reboot into recovery
   • Now tap Factory Reset, then Format data / factory reset and continue with the formatting process. This will remove encryption and delete all files stored in the internal storage, as well as format your cache partition (if you have one).
   • Return to the main menu
   • Sideload the LineageOS package
     • On the device, select "Apply Update", then "Apply from sd card" to begin flashing rom
   • Return to the main menu
   • (Optionally) If you want to install any add-ons, click "Advanced", then "Reboot to Recovery", then when your device reboots, click "Apply Update", then "Apply from sdcard", then chosse your packages in.
3. Once you have installed everything successfully, click the back arrow in the top left of the screen, then "Reboot system now"

Downloads:
http://GDrive
https://drive.google.com/drive/folders/1tpg8SwQn3-kV4b-Ta_4yenLwQNHLWiyR?usp=sharing

Device Trees & Kernel Source:

• https://github.com/XperiaBrickers-10IV/kernel_sony_murray
• Device Trees will be public soon

Current Bugs:
Sound does not work
screen flickers black
vibration does not work
USB doesn't work in recovery
takes about 3 buttton presses to get out of deep sleep
ENG build so you will get a red border

Many thanks to:
@clfbbn
@lolipuru
@WindowsDev0
@dylanneve1