TP-Link 无线网卡无线连接成功,无法上网,怎么办?
source link: https://service.tp-link.com.cn/detail_article_2097.html
Go to the source link to view the article. You can view the picture content, updated content and better typesetting reading experience. If the link is broken, please click the button below to view the snapshot at that time.
无线终端连接模拟AP无线网络时,如果出现无线连接成功,但无法上网,可按以下方法排查:
确认无线终端是自动获取IP地址、DNS服务器地址,并且获取到与模拟AP相同网段的IP地址。
注意:不同厂商的无线终端查询方式可能不同,请参考对应无线终端的说明书或咨询厂商。
确认安装模拟AP网卡的电脑本身可以正常上网。
关闭模拟AP,再次开启模拟AP并重新配置无线参数与共享连接。确保共享的网络连接是电脑用于连接到Internet的网络连接。
使用其他无线终端连接模拟AP的无线信号,确认是否可以正常上网。也可以尝试使用该无线终端连接其他正常的无线网络对比测试。
无线网卡更换到其他可上网电脑,安装网卡驱动、客户端软件并配置模拟AP,再使用无线终端连接模拟AP信号对比测试。
Recommend
-
2
WDS桥接成功但无法上网,怎么办? 尊敬的用户! 我司不同路由器的界面风格可能不同,对应的排查方法有所差异,为了针对性的解决您遇到的问题,请登录副路由器管理界面,确认并选择正确...
-
6
[无线网卡] 客户端应用程序无法使用怎么办? 无线网卡驱动程序及...
-
8
无线网卡连接信号后会自动断开,怎么办? 问题介绍 无线网卡连接无线信号,经常自动断开。 解决方法 1.
-
4
无线网卡驱动程序及客户端安装完成,打开TP-LINK无线客户端应用程序,如出现以下问题: 1、客户端界面的选项都是灰色,无法进行操作。 2、搜索...
-
4
3G路由器3G状态显示拨号成功,也获取到IP地址,但电脑连接3G路由器无法上网。请按照以下步骤排查。
-
1
设置好路由器WAN口的固定IP地址后,网络连接状态显示已连接,但是无法上网。本文提供...
-
3
问题介绍 我司免驱版无线网卡插入电脑的USB接口后,没有弹出自动安装的提示框。无法自动安装驱动程序。出现该问题一般是系统没有开启自动播放的功能引起的,解决方法有两种: ...
-
5
设置好路由器WAN口自动获得IP地址后,WAN口的网络连接状态...
-
5
无线扩展器的指示灯变为绿色或橙色,则说明扩展成功。此时终端连接扩展后的信号就可以上网,如果连接信号无法上网,请按照以下步骤排查。
-
4
路由器WAN口拨号成功但无法上网,请按照以下方式排查: 电脑需要设置为自动获取IP
About Joyk
Aggregate valuable and interesting links.
Joyk means Joy of geeK