Five reasons to heat your home using infrared fabric
source link: https://techxplore.com/news/2024-02-home-infrared-fabric.html
Go to the source link to view the article. You can view the picture content, updated content and better typesetting reading experience. If the link is broken, please click the button below to view the snapshot at that time.
February 14, 2024
Five reasons to heat your home using infrared fabric
by Michael Siebert, The Conversation
Imagine heating your home from the ceiling, not from underfloor heating or radiators. Once installed like wallpaper, hi-tech infrared fabric emits heat in a similar way to the sun's rays. This could be a logical way to add low-carbon heat into existing homes that need retrofitting to improve energy efficiency.
Under the currently proposed legislative changes, no new home will be built with an incoming gas supply after 2025. If you're buying a new home that's been designed and built to the new Future Homes Standard, you've got little to worry about.
But for older properties, retrofitting projects can be complex, inconvenient and expensive. As gas boilers are phased out, heat pumps are usually the preferred alternative for energy-efficient housing. However, infrared fabric technology could be much better suited as a low-carbon heating solution for our existing housing stock, and here's why.
1. Instant heat
Unlike heat pumps, which are a slow response heating system, infrared fabric emits radiant heat that can be felt within minutes. That has multiple advantages.
Gas boilers heat up our rooms quickly so we don't have to leave the heating on when we're out, but heat pumps don't work like that. Instead, they deliver a continuous low level of heat, so homes need to be well-insulated to retain that heat and airtight to stop drafts. But, without drafts, we'll need a mechanical ventilation system to circulate fresh air.
Instant radiant heat reduces the need for all these additional interventions by directly heating the people and surfaces in a room rather than the air itself. It can be turned on or boosted to higher temperatures by motion sensors when you enter a room, with instant results. That means you only need to heat the rooms that you're in, rather than an entire house.
2. Simple to install
Infrared fabric looks like a roll of slightly stiff wallpaper. It's essentially a graphene sandwich, a thin film of carbon between two sheets of paper that conducts low voltage electricity and emits infrared heat, like the sun, but without the light or harmful ultraviolet.
A room's ceiling area emits the right amount of heat for a room, making installation very simple in any property, irrespective of its construction, shape or size. It's little more than a wallpapering job with a click together wiring connection. Your gas boiler could even be left in place for emergencies alongside it. By comparison, heat pump installation requires extensive additional works and sometimes a period of relocation.
3. Affordable heat
Infrared fabric is affordable to install and maintain due to its simplicity with a total cost of around £100 per sq meter for a full system. And it's quite indestructible—it can have holes cut out of it and can get wet in floods without any danger to occupants or damage to the material. It's also affordable to run.
Heat pumps are known to generate more energy than they use, up to three times as much, by taking low grade heat out of the air and compressing it. Infrared fabric can't match that, but because radiant heat is instant, it's only being emitted when needed in the rooms that you're in, so even allowing for a hot water system the total energy use can be up to 20% less than from a heat pump.
This article is republished from The Conversation under a Creative Commons license. Read the original article.
Recommend
-
29
Abstract: Accurate face recognition techniques make a series of critical applications possible: policemen could employ it to retrieve criminals' faces from surveillance video streams; cross boarder travelers...
-
7
Mimir - A Near-Infrared Wide-Field Imager, Spectrometer, and Polarimeter ...
-
6
Code now on github The most recent code is at github.com/shirriff/Arduino-IRremote. If you have any issues, please report them there. Do you want to control your A...
-
10
Active Camouflage Material Shows Promise At Hiding From Infrared Or Visual Detection An invisibility cloak may seem like science fiction, but despite that, many scientists and engineers have put much...
-
7
Visible Infrared Imaging Radiometer Suite From Wikipedia, the free encyclopedia Jump to navigation
-
7
Five reasons your resume isn’t workingResume fixes to help land your first junior position
-
11
Your iPhone Is Taking Infrared Photos Of Your Face All The Time 4584 members Technology Technology on Digg: the best articl...
-
6
Nintendo Switch app turns the Joy-Con into an infrared tripwire Nintendo Labo-like functionality using the Joy-Con By...
-
5
C-Suite LifestyleFive reasons why you should grow your egoPoor old ego: it gets such a bad rap. We call it out when people have self-serving attitudes and behaviours...
-
2
What Is Infrared Photography? A Beginner's Guide By Emma Garofalo Published 9 hours ago Infrared photography is easily one of th...
About Joyk
Aggregate valuable and interesting links.
Joyk means Joy of geeK