[GUIDE] Android 8 API27 SUPERMOD for YT9216BF YT9216CFJ YT9216BJ YT9216BFJ YT921...
source link: https://forum.xda-developers.com/t/guide-android-8-api27-supermod-for-yt9216bf-yt9216cfj-yt9216bj-yt9216bfj-yt9216cj-root-viper4android-twrp-custom-ui-brick-recovery-and-more.4318121/page-48#post-88648667
Go to the source link to view the article. You can view the picture content, updated content and better typesetting reading experience. If the link is broken, please click the button below to view the snapshot at that time.
[GUIDE] Android 8 API27 SUPERMOD for YT9216BF YT9216CFJ YT9216BJ YT9216BFJ YT9216CJ - root, Viper4Android, TWRP, Custom UI, brick recovery and more
Your head unit isn't compatible with any of our current mods. Our current packages support MCU version 4.1 and lower. We are currently working on a new Android 8 package that'll support newer version of MCU's. Stay tuned.Hi all! I’m a new user here. I’ve had my head unit for a little bit now, but have been really curious about rooting etc.
I’ve done heaps of research but am honestly a bit nervous about it all.
Just really want to make sure everything is all good before I do this mod.
Attached are photos of my 2 info screens, but I have also added photos of info from DevCheck Device and System Info app.
Dunno if that helps but I thought I’d add them.
It does say it is rooted, but if I run rootcheck, it says it’s not installed correctly? Weird.
Thanks in advance.
Reactions: Chook_Look
Chook_Look
New member
Your head unit isn't compatible with any of our current mods. Our current packages support MCU version 4.1 and lower. We are currently working on a new Android 8 package that'll support newer version of MCU's. Stay tuned.
Ok, no worries. I will wait for your new stuff to be released. Thank you for all your hard work and time. Cheers mate.
jmatienza10
Member
I think it's running Android 8 with a A7 Quadcore @ 1.5ghz
I'm not quite sure if the 4gb ram and 32gb rom is correct and I doubt it
Attachments
jmatienza10
Member
Hi all! I’m a new user here. I’ve had my head unit for a little bit now, but have been really curious about rooting etc.
I’ve done heaps of research but am honestly a bit nervous about it all.
Just really want to make sure everything is all good before I do this mod.
Attached are photos of my 2 info screens, but I have also added photos of info from DevCheck Device and System Info app.
Dunno if that helps but I thought I’d add them.
It does say it is rooted, but if I run rootcheck, it says it’s not installed correctly? Weird.
Thanks in advance.
Which app did you use to see the details?
Edited: My bad, I thought you meant system info in the settings, found the app though. Thanks!
Reactions: Chook_Look
jmatienza10
Member
Hi all! I’m a new user here. I’ve had my head unit for a little bit now, but have been really curious about rooting etc.
I’ve done heaps of research but am honestly a bit nervous about it all.
Just really want to make sure everything is all good before I do this mod.
Attached are photos of my 2 info screens, but I have also added photos of info from DevCheck Device and System Info app.
Dunno if that helps but I thought I’d add them.
It does say it is rooted, but if I run rootcheck, it says it’s not installed correctly? Weird.
Thanks in advance.
@Chook_Look do you experience lag on this version?
Chook_Look
New member
@Chook_Look do you experience lag on this version?
Actually it’s not too bad to be honest.
It’s does have its moments, but nothing too bad. Probably could be better.
Sometimes it can be a bit slow loading things, or the fact it has some problem with certain MP3’s and won’t play them. Still trying to figure out why that is.
Overall, not too bad.
I purchased this to replace my oem head unit, so I could use Waze and be a bit more up to date with things lol.
Android: D02022HA16_AHD_00012_V009_HIFI
Android os: Android 11.0 CAR AUDIO: B7.3.7 (X2)
CAN Pro: 1.017 (disConnected): No protocol/No protocol/No protoc
DDR: 2G
FLASH: 32G
CPU: A7 1.5GHz x 4
Display: 1024*600(Ivds)
MCU: 4.4 (X2)
Audio decoder: ST/TDA7729
I'm wondering if there is any way to get Bluetooth working with earbuds / keybd. It seems to be modified to only work with phone? Any advice on how to undo that if possible? I have no interest in phone pairing or android auto, just want to have standard android bluetooth support.
TIA
jmatienza10
Member
Actually it’s not too bad to be honest.
It’s does have its moments, but nothing too bad. Probably could be better.
Sometimes it can be a bit slow loading things, or the fact it has some problem with certain MP3’s and won’t play them. Still trying to figure out why that is.
Overall, not too bad.
I purchased this to replace my oem head unit, so I could use Waze and be a bit more up to date with things lol.
Got it, mine's the same I think, but wanted it to be smoother. Waze takes at least 3 mins to open in mine.
Hi Asking your help on know which software to flash on my head unit and how to back up also, attached are the details
I think it's running Android 8 with a A7 Quadcore @ 1.5ghz
I'm not quite sure if the 4gb ram and 32gb rom is correct and I doubt it
Nauman Rasool
New member
Please help me out. I updated my Vertical Screen Head Unit. Below is the image which I took before updating. I had the issue of Volumen with this version. After Volume digit 5 only volume digit increasing but the sound remained the same means till digit 5 sound increased but after digit 5 no increase in sound. All other things were working well even the CanBus.
I was looking for my volume issue and someone said that after updating the firmware it will work fine so I updated the firmware to 7.3.8 from this http://file.xygala.com/?dir=uploads...16CJ/安卓10.0/竖屏/外文/1024x768(lvds)/XYAUTO_7.3.8
But after updating still the volume issue is same but now CanBus is not working. I have tried multiple things even the chines version but it shows disconnected every time as you can see in another image. Unfortunately i don't have the backup of my old firmware. Please help me out. I am worried about my head unit.
Attachments
Sorry, we don't work with vertical unitsHi @ExtremeMOD,
Please help me out. I updated my Vertical Screen Head Unit. Below is the image which I took before updating. I had the issue of Volumen with this version. After Volume digit 5 only volume digit increasing but the sound remained the same means till digit 5 sound increased but after digit 5 no increase in sound. All other things were working well even the CanBus.
I was looking for my volume issue and someone said that after updating the firmware it will work fine so I updated the firmware to 7.3.8 from this http://file.xygala.com/?dir=uploads/XY公版/9216/9216BJ-9216CJ-安卓10.0(00012-V009最新)/9216BJ_9216CJ/安卓10.0/竖屏/外文/1024x768(lvds)/XYAUTO_7.3.8
But after updating still the volume issue is same but now CanBus is not working. I have tried multiple things even the chines version but it shows disconnected every time as you can see in another image. Unfortunately i don't have the backup of my old firmware. Please help me out. I am worried about my head unit.
View attachment 5927811
Xnitro67
Senior Member
Because they are notoriously poorly built to a point where modifying them wouldn't make them any better.i know you guys dont work with vertical units but is because you guys dont have any to mess around with or something else?
Nauman Rasool
New member
Because they are notoriously poorly built to a point where modifying them wouldn't make them any better.
@ExtremeMOD Is there any way to get their firmware? I myself a developer If I get the vertical screen firmware code. Might I able to play with that.
Sure, simply go to http://file.xygala.com/ and look for it.@ExtremeMOD Is there any way to get their firmware? I myself a developer If I get the vertical screen firmware code. Might I able to play with that.
Login: xyauto
Pass: 123456
Top Liked Posts
-
hello ExtremeMOD
I have an AC8227L YT9216 android car radio.
black screen after fake update
the problem is that I did not make a backup of my unit
I tried to revive my post via spflashtool
I tried with several software YT9216 1G and 2G but without success the only thing that works is that the appearance of the android logo which lights up and goes out
for information the scatter and preloader are downloaded from the xda site but the progress of the download works well
I don't know how can you guide me brother ExtremeMOD
and thank you very muchHi all! I’m a new user here. I’ve had my head unit for a little bit now, but have been really curious about rooting etc.
I’ve done heaps of research but am honestly a bit nervous about it all.
Just really want to make sure everything is all good before I do this mod.
Attached are photos of my 2 info screens, but I have also added photos of info from DevCheck Device and System Info app.
Dunno if that helps but I thought I’d add them.
It does say it is rooted, but if I run rootcheck, it says it’s not installed correctly? Weird.
Thanks in advance.Hi all! I’m a new user here. I’ve had my head unit for a little bit now, but have been really curious about rooting etc.
I’ve done heaps of research but am honestly a bit nervous about it all.
Just really want to make sure everything is all good before I do this mod.
Attached are photos of my 2 info screens, but I have also added photos of info from DevCheck Device and System Info app.
Dunno if that helps but I thought I’d add them.
It does say it is rooted, but if I run rootcheck, it says it’s not installed correctly? Weird.
Thanks in advance.Which app did you use to see the details?
Edited: My bad, I thought you meant system info in the settings, found the app though. Thanks!
Recommend
About Joyk
Aggregate valuable and interesting links.
Joyk means Joy of geeK