7

退出 qBittorrent 后网络会轻微中断，求诊断~

 1 year ago
source link: https://www.v2ex.com/t/936724
Go to the source link to view the article. You can view the picture content, updated content and better typesetting reading experience. If the link is broken, please click the button below to view the snapshot at that time.
neoserver,ios ssh client

V2EX  ›  宽带症候群

退出 qBittorrent 后网络会轻微中断，求诊断~

  microka · 5 小时 56 分钟前 · 299 次点击

用的是 B610-4E 光猫拨号，开启 IPv6 ，光猫配置如下：

硬件版本：1B40.A 软件版本：V5R019C20S190

D3aO9bh.png

wan 配置

3sBALLH.png

DHCPv6 配置

Windows 11 + qBittorrent 4.5.2 ，种子数 5000+，活动状态（正在产生上传或下载流量）种子数 30~50 左右，具体症状为：退出 qBittorrent 后（退出前已停止所有正在活动的种子），网络会出现轻微中断，比如本机运行的 ToDesk 和向日葵大概率会变灰（即连不上服务器），但很快又能重新连上；比如局域网内另一台设备访问获取公网 IPv6 串流会出现断流，也是重新连接就能恢复正常，但过一会儿又有概率再次断流。

查看光猫调试日志，发现 log 里面自从光猫上一次重启后，正是在退出 qBittorrent 后，才产生了新的日志记录。光猫日志如下（不含光猫重启初始化阶段）：

2023-05-01 05:14:23 [Debug][Debug-Log] static:[upnp] ActionName: GetExternalIPAddress, Source IP: 192.168.100.88
2023-05-01 05:14:23 [Debug][Debug-Log] static:[upnp] ActionName: GetExternalIPAddress, Source IP: 192.168.100.88
2023-05-01 05:14:23 [Debug][Debug-Log] static:[upnp] ActionName: GetSpecificPortMappingEntry, Source IP: 192.168.100.88
2023-05-01 05:14:23 [Debug][Debug-Log] static:[upnp] ActionName: GetStatusInfo, Source IP: 192.168.100.88
2023-05-01 05:14:23 [Debug][Debug-Log] static:[upnp] ActionName: GetStatusInfo, Source IP: 192.168.100.88
2023-05-01 05:14:27 [Debug][Debug-Log] static:[upnp] ActionName: DeletePortMapping, Source IP: 192.168.100.88
2023-05-01 05:14:27 [Debug][Debug-Log] static:[upnp] ActionName: DeletePortMapping, Source IP: 192.168.100.88
2023-05-01 05:19:31 [Debug][Debug-Log] static:[upnp] ActionName: GetExternalIPAddress, Source IP: 192.168.100.88
2023-05-01 05:19:31 [Debug][Debug-Log] static:[upnp] ActionName: GetExternalIPAddress, Source IP: 192.168.100.88
2023-05-01 05:19:31 [Debug][Debug-Log] static:[upnp] ActionName: GetSpecificPortMappingEntry, Source IP: 192.168.100.88
2023-05-01 05:19:31 [Debug][Debug-Log] static:[upnp] ActionName: GetStatusInfo, Source IP: 192.168.100.88
2023-05-01 05:19:31 [Debug][Debug-Log] static:[upnp] ActionName: GetStatusInfo, Source IP: 192.168.100.88
2023-05-01 05:21:01 [Alert][Debug-Log] dynamic:Load memu from the directory [/html/menu/MenuSmartChina.xml].
2023-05-01 05:21:58 [Debug][Debug-Log] static:[dhcpd]send Ack, xid[3a72bce4], mac[********(LAN1 下连交换机)], request serverip[192.168.100.1], clientip[192.168.100.77], yourip[192.168.100.77], dns1[192.168.100.1]
2023-05-01 05:22:33 [Debug][Debug-Log] static:[dhcpd]send Ack, xid[e5f0c16e], mac[****************(LAN3 下连交换机)], request serverip[192.168.100.1], clientip[192.168.100.101], yourip[192.168.100.101], dns1[192.168.100.1]
2023-05-01 05:24:39 [Debug][Debug-Log] static:[upnp] ActionName: GetExternalIPAddress, Source IP: 192.168.100.88
2023-05-01 05:24:39 [Debug][Debug-Log] static:[upnp] ActionName: GetExternalIPAddress, Source IP: 192.168.100.88
2023-05-01 05:24:39 [Debug][Debug-Log] static:[upnp] ActionName: GetSpecificPortMappingEntry, Source IP: 192.168.100.88
2023-05-01 05:24:39 [Debug][Debug-Log] static:[upnp] ActionName: GetStatusInfo, Source IP: 192.168.100.88
2023-05-01 05:24:39 [Debug][Debug-Log] static:[upnp] ActionName: GetStatusInfo, Source IP: 192.168.100.88
2023-05-01 05:29:47 [Debug][Debug-Log] static:[upnp] ActionName: GetExternalIPAddress, Source IP: 192.168.100.88
2023-05-01 05:29:47 [Debug][Debug-Log] static:[upnp] ActionName: GetExternalIPAddress, Source IP: 192.168.100.88
2023-05-01 05:29:47 [Debug][Debug-Log] static:[upnp] ActionName: GetSpecificPortMappingEntry, Source IP: 192.168.100.88
2023-05-01 05:29:47 [Debug][Debug-Log] static:[upnp] ActionName: GetStatusInfo, Source IP: 192.168.100.88
2023-05-01 05:29:47 [Debug][Debug-Log] static:[upnp] ActionName: GetStatusInfo, Source IP: 192.168.100.88
2023-05-01 05:33:57 [Debug][Debug-Log] static:[dhcpd]send Ack, xid[5b97d541], mac[********(LAN1 下连交换机接入设备)], request serverip[192.168.100.1], clientip[192.168.100.64], yourip[192.168.100.64], dns1[192.168.100.1]
2023-05-01 05:34:56 [Debug][Debug-Log] static:[upnp] ActionName: GetExternalIPAddress, Source IP: 192.168.100.88
2023-05-01 05:34:56 [Debug][Debug-Log] static:[upnp] ActionName: GetExternalIPAddress, Source IP: 192.168.100.88
2023-05-01 05:34:56 [Debug][Debug-Log] static:[upnp] ActionName: GetSpecificPortMappingEntry, Source IP: 192.168.100.88
2023-05-01 05:34:56 [Debug][Debug-Log] static:[upnp] ActionName: GetStatusInfo, Source IP: 192.168.100.88
2023-05-01 05:34:56 [Debug][Debug-Log] static:[upnp] ActionName: GetStatusInfo, Source IP: 192.168.100.88
2023-05-01 05:37:14 [Debug][Debug-Log] static:[dhcpd]send Ack, xid[dea87009], mac[********(LAN3 下连交换机接入设备)], request serverip[192.168.100.1], clientip[192.168.100.42], yourip[192.168.100.42], dns1[192.168.100.1]
2023-05-01 05:40:04 [Debug][Debug-Log] static:[upnp] ActionName: GetExternalIPAddress, Source IP: 192.168.100.88
2023-05-01 05:40:04 [Debug][Debug-Log] static:[upnp] ActionName: GetExternalIPAddress, Source IP: 192.168.100.88
2023-05-01 05:40:04 [Debug][Debug-Log] static:[upnp] ActionName: GetSpecificPortMappingEntry, Source IP: 192.168.100.88
2023-05-01 05:40:04 [Debug][Debug-Log] static:[upnp] ActionName: GetStatusInfo, Source IP: 192.168.100.88
2023-05-01 05:40:04 [Debug][Debug-Log] static:[upnp] ActionName: GetStatusInfo, Source IP: 192.168.100.88
2023-05-01 05:41:10 [Debug][Debug-Log] static:[dhcpc]receive Ack, wan[wan4], xid[2e7bb11e], mac[******(B610 IPTV 口)], request serverip[183.235.147.255], clientip[100.108.156.233], yourip[100.108.156.233], gateway ip[120.196.31.74], dns1[183.235.146.14], dns2[183.235.146.15]
2023-05-01 05:41:18 [Debug][Debug-Log] static:[dhcpd]send Ack, xid[c84bed2a], mac[****************(LAN3 下连交换机接入设备)], request serverip[192.168.100.1], clientip[192.168.100.88], yourip[192.168.100.88], dns1[192.168.100.1]
2023-05-01 05:41:22 [Debug][Debug-Log] static:[dhcp6c]receive dhcp reply! wanName[ppp259],xid[0xd364ec]
2023-05-01 05:41:22 [Informational][Debug-Log] static:[dhcp6c]receive dhcp reply! wanName[ppp259],aftrName[null],dns[2409:8057:2000:2::8,2409:8057:2000:6::8],gateway[null]
2023-05-01 05:42:07 [Debug][Debug-Log] static:[dhcpd]send Ack, xid[1c257873], mac[****************(LAN1 下连交换机接入设备)], request serverip[192.168.100.1], clientip[192.168.100.201], yourip[192.168.100.201], dns1[192.168.100.1]
2023-05-01 05:45:12 [Debug][Debug-Log] static:[upnp] ActionName: GetExternalIPAddress, Source IP: 192.168.100.88
2023-05-01 05:45:12 [Debug][Debug-Log] static:[upnp] ActionName: GetExternalIPAddress, Source IP: 192.168.100.88
2023-05-01 05:45:12 [Debug][Debug-Log] static:[upnp] ActionName: GetSpecificPortMappingEntry, Source IP: 192.168.100.88
2023-05-01 05:45:12 [Debug][Debug-Log] static:[upnp] ActionName: GetStatusInfo, Source IP: 192.168.100.88
2023-05-01 05:45:12 [Debug][Debug-Log] static:[upnp] ActionName: GetStatusInfo, Source IP: 192.168.100.88
2023-05-01 05:50:21 [Debug][Debug-Log] static:[upnp] ActionName: GetExternalIPAddress, Source IP: 192.168.100.88
2023-05-01 05:50:21 [Debug][Debug-Log] static:[upnp] ActionName: GetExternalIPAddress, Source IP: 192.168.100.88
2023-05-01 05:50:21 [Debug][Debug-Log] static:[upnp] ActionName: GetSpecificPortMappingEntry, Source IP: 192.168.100.88
2023-05-01 05:50:21 [Debug][Debug-Log] static:[upnp] ActionName: GetStatusInfo, Source IP: 192.168.100.88
2023-05-01 05:50:21 [Debug][Debug-Log] static:[upnp] ActionName: GetStatusInfo, Source IP: 192.168.100.88
2023-05-01 05:51:58 [Debug][Debug-Log] static:[dhcpd]send Ack, xid[3a72bce4], mac[********(LAN1 下连交换机)], request serverip[192.168.100.1], clientip[192.168.100.77], yourip[192.168.100.77], dns1[192.168.100.1]
2023-05-01 05:52:34 [Debug][Debug-Log] static:[dhcpd]send Ack, xid[e5f0c16e], mac[****************(LAN3 下连交换机)], request serverip[192.168.100.1], clientip[192.168.100.101], yourip[192.168.100.101], dns1[192.168.100.1]
2023-05-01 05:55:30 [Debug][Debug-Log] static:[upnp] ActionName: GetExternalIPAddress, Source IP: 192.168.100.88
2023-05-01 05:55:30 [Debug][Debug-Log] static:[upnp] ActionName: GetExternalIPAddress, Source IP: 192.168.100.88
2023-05-01 05:55:30 [Debug][Debug-Log] static:[upnp] ActionName: GetSpecificPortMappingEntry, Source IP: 192.168.100.88
2023-05-01 05:55:30 [Debug][Debug-Log] static:[upnp] ActionName: GetStatusInfo, Source IP: 192.168.100.88
2023-05-01 05:55:30 [Debug][Debug-Log] static:[upnp] ActionName: GetStatusInfo, Source IP: 192.168.100.88
2023-05-01 05:57:06 [Debug][Debug-Log] static:[dhcpd]send Ack, xid[5b97d541], mac[********(LAN1 下连交换机接入设备)], request serverip[192.168.100.1], clientip[192.168.100.64], yourip[192.168.100.64], dns1[192.168.100.1]

192.168.100.88 是我运行 qBittorrent 的设备 IP ，日志时间需要+8 转换为本地时间，即 13:14:13 至 13:57:06 翻查 qBittorrent 日志

(N) 2023-05-01T13:14:29 - 发起了 qBittorrent 终止操作
(I) 2023-05-01T13:14:29 - UPnP/NAT-PMP support: OFF
(N) 2023-05-01T13:22:37 - qBittorrent 现在准备好退出了

我是在 13:06-13:14 期间对活动种子执行停止操作，13:14 执行退出 qB 指令，13:22 完成 qB 退出。

求高手帮忙诊断一下，我这问题是出在哪呢？是光猫没配置好还是 qB 的软件问题？种子数太多如果换另一个 BitTorrent 测试工作量太大，所以先来请教一下大佬们，谢谢。


report

Recommend

About Joyk


Aggregate valuable and interesting links.
Joyk means Joy of geeK