![](/style/images/good.png)
![](/style/images/bad.png)
Wanbo T6 Max Android Projector Review
source link: https://forum.xda-developers.com/t/wanbo-t6-max-android-projector-review.4405059/page-2#post-88322081
Go to the source link to view the article. You can view the picture content, updated content and better typesetting reading experience. If the link is broken, please click the button below to view the snapshot at that time.
Wanbo T6 Max Android Projector Review
cperez86
New member
I have a problem with my T6 Max
I try to pair the remote but I can't.
What is the key combination for pairing mode?
house + setting???
cperez86
New member
Link
They also solved my doubt to pair the remote control, the buttons to put it in pairing mode are left and right simultaneously.
But I still have the problem with google assistant not listening.
It activates but does not recognize the voice
Reactions: pequenojuan and oldman20
Yesterday I was talking to support ([email protected]) and they gave me a new firmware: 20221014
Link
They also solved my doubt to pair the remote control, the buttons to put it in pairing mode are left and right simultaneously.
But I still have the problem with google assistant not listening.
It activates but does not recognize the voice
would u request img versino for Burning Tool?
arisa1
New member
@oldman20 I'm having a bit of a problem updating the version 20220419 it makes it impossible for me to auto focus or adjust it via remote, can you help me? maybe i need another firmware for it can be as 20220308 as possible
Let me check
pequenojuan
New member
Yesterday I was talking to support ([email protected]) and they gave me a new firmware: 20221014
Link
They also solved my doubt to pair the remote control, the buttons to put it in pairing mode are left and right simultaneously.
But I still have the problem with google assistant not listening.
It activates but does not recognize the voice
Llevo días intentando actualizar con el upgrade de la pagina official y siempre me termina dando error.
Voy a probar con el que te han enviado a ver que tal.
adjunto el link del que probe: https://gopokitter.com/blogs/how-to-upgrade-firmware/how-to-upgrade-firmware
Mod translation:
I've been trying to update for days with the upgrade from the official page and it always ends up giving me an error.
I'm going to try the one they sent you and see how it goes.
I attach the link of the one I tried: https://gopokitter.com/blogs/how-to-upgrade-firmware/how-to-upgrade-firmware
I have used the firmware that you posted on MEGA and it has worked perfectly for me, but according to the update that you did on my projector, they continue with the version.
Version 20220917
I attached the image
Attachments
no se cual es la mas nueva.
pcpaul2
New member
For all German People, i write an Review in german about the Wanbo T6 Max
hyago amaral
New member
altojl2
New member
I attach the latest firmware that the manufacturer has provided me 22/02/2023
![mega.nz](https://forum.xda-developers.com/proxy.php?image=https%3A%2F%2Fmega.nz%2Frich-file.png&hash=f1f7ca86736d23e8711304ca888fd57f&return_error=1)
958.48 MB file on MEGA
Tambien adjunto ultimo firmware que me ha facilitado el fabricante. 22/02/2023
![mega.nz](https://forum.xda-developers.com/proxy.php?image=https%3A%2F%2Fmega.nz%2Frich-file.png&hash=f1f7ca86736d23e8711304ca888fd57f&return_error=1)
958.48 MB file on MEGA
darioh
New member
Hello everyone. Does anyone know if there is a possibility that it always turns on with the hdmi? I'm clear that I connected a 4k firestick and would like to use it without having to change the input source every time I turn on the projector. Thank you
I attach the latest firmware that the manufacturer has provided me 22/02/2023Hola a todos. Alguien sabe si existe la posibilidad de que siempre encienda con el hdmi? Tengo claro que nectado un firestick 4k y quisiera usarlo sin necesidad de cambiar la fuente de entrada cada vez que enciendo el proyector. Gracias.958.48 MB file on MEGA
mega.nz
Tambien adjunto ultimo firmware que me ha facilitado el fabricante. 22/02/2023958.48 MB file on MEGA
mega.nz
Hello! did you install this new firmware on your T6max? Is everything working properly? Are there calibration options in the menu and u (brightness, saturation, etc.) Did you do it from a flash drive by local update? Regards
altojl2
New member
Hello! did you install this new firmware on your T6max? Is everything working properly? Are there calibration options in the menu and u (brightness, saturation, etc.) Did you do it from a flash drive by local update? Regards
Hello, I updated it from a flash drive and the local update section. The firmware works fine, I have not detected any errors for the moment. You can set brightness, contrast, saturation, etc.
Top Liked Posts
-
Good , I recently bought a Wanbo T6 MAX (2gb/16gb GLOBAL VERSION) , the team I mark update by OTA and to update it turned off and does not pass the welcome screen, talk to the provider and I sent this firmware.
2. I copy the files.
3. I connect the usb and then the power supply.
4. I press the one button on the T6 MAX until it flashes and release it, it comes out with a welcome message but it doesn't go any further.
What can I do?
similar error:
--------------------------------------------------
Buenas , recientemente he comprado un Wanbo T6 MAX (2gb/16gb GLOBAL VERSION) , el equipo me marco actualizacion por OTA y al actualizar se apago y no pasa de la pantalla de bienvenida, hable con el proveedor y me mando este firmware.
2. Copio los ficheros.
3. Conecto el usb y luego la fuente de alimentacion.
4. Presiono el unico boton del T6 MAX hasta que parpadea y lo suelto, sale mensaje de bienvenida pero no pasa de ahi.
Que puedo hacer¿?
similar error:Yesterday I was talking to support ([email protected]) and they gave me a new firmware: 20221014
Link
They also solved my doubt to pair the remote control, the buttons to put it in pairing mode are left and right simultaneously.
But I still have the problem with google assistant not listening.
It activates but does not recognize the voiceHi
I have received latest Wanbo model week ago. Have been owning many projectors and android tv sets before but this one is my first projector with embedded Android bought for testing and future mods
Projector has very good hardware for the price, but fails miserably on software level.
Straight of the box with the latest software update many apps do not work well or at all. Netflix returns -80 errors on start. Disney and amazon apps crashing. It is not possible to see projector as cast source from android phone (Poko F3) without app that only cast in SD and displays annoying widgets.
To workaround very poor android experience I have bough cheapest chromecast but because projector requires android tv app to stream from hdmi it is not possible to use chromecast the same way as on tv. Simple actions like changing video quality on chromecast doesn't work and returns user to projector os.
Then I figured out to connect keyboard with touch pad. This allows me to use chrome on projector with youtube and netflix like on PC.
Netflix and other streaming providers are on SD quality due to lack of wildewine support so not really benefiting from projectors full hd features.
After all week of poking with it I would never go with the Android embedded in projector and prefer chromecast or connecting laptop or even phone to normal hdmi only projector that does have good contrast. It is amazing quality hardware but it looks like thet got no time to polish software.i got my T6 Max, and found it's Chinese Version, still searching the Global version firmware for updating it ,
so terrible.....Good , I recently bought a Wanbo T6 MAX (2gb/16gb GLOBAL VERSION) , the team I mark update by OTA and to update it turned off and does not pass the welcome screen, talk to the provider and I sent this firmware.
2. I copy the files.
3. I connect the usb and then the power supply.
4. I press the one button on the T6 MAX until it flashes and release it, it comes out with a welcome message but it doesn't go any further.
What can I do?
similar error:
--------------------------------------------------
Buenas , recientemente he comprado un Wanbo T6 MAX (2gb/16gb GLOBAL VERSION) , el equipo me marco actualizacion por OTA y al actualizar se apago y no pasa de la pantalla de bienvenida, hable con el proveedor y me mando este firmware.
2. Copio los ficheros.
3. Conecto el usb y luego la fuente de alimentacion.
4. Presiono el unico boton del T6 MAX hasta que parpadea y lo suelto, sale mensaje de bienvenida pero no pasa de ahi.
Que puedo hacer¿?
similar error:Did you checked fw is correct? Try other port and other usb?
And i dont "see" u extract rar file into USB FAT32?
Recommend
About Joyk
Aggregate valuable and interesting links.
Joyk means Joy of geeK