Error on using QFil

Hi
I'm getting below error while trying to flash using QFil for max pro m1
Download fail:FireHorse Fail:FHLoader Fail: The system cannot find the file specified.

Qfil version : 2.0.1.7
windows 10 OS
Can someone please help.

Thanks & Regards,
Vimal

[email protected] said:

Hi
I'm getting below error while trying to flash using QFil for max pro m1
Download fail:FireHorse Fail:FHLoader Fail: The system cannot find the file specified.

Qfil version : 2.0.1.7
windows 10 OS
Can someone please help.

Thanks & Regards,
Vimal

Click to expand...

Have u installed drivers

zb602kl_x00tdb

benchmarker said:

It will install QFIL Rom (Unofficial Stock ROM)
So flash Official STOCK or any desired Rom :fingers-crossed:

May I ask about
the phone i bought cheap because its bricked.
ASUS Zenfone Max Pro M1 zb602kl_x00tdb 4gb_64gb
the chip of this phone is SMD636
I open once to see some details but no history of hardware service.
unable to boot system and
unable to boot recovery mode
Fastboot (CSC) mode seem locked
I tried unlock tool saw from Youtube after auto-cmd the phone reboot to something like "red state" and then reboot back to fastboot then its unlocked. but mind never got into red only green adn black-screen(EDLmode).
I also tried Flashall.AFT but the command shows only "frp" command is succesful and other following commands are "unknown" or "not allowed in lock state".
Even flashing official update.zip show "android-info.txt not included". but I think It might work if I try other official update.zip.
I don't if there are any posible command to toggle "usb debugging" and "allow oem unlocking".
so this is my only big hope the QFIL tool. Do you have other raw/backup files for qfil like "qcn" I don't really know what to do next.

the chip of my zenfone is SMD636
I'm new to flashing Qualcomm devices
but does this matter? prog_emmc_ufs_firehose_Sdm660_ddr.elf
or do I have to us prog_emmc_ufs_firehose_Sdm636_ddr_asus.elf or do you have any recommendation.

Thanks in advance.

My phone isn't turning on

My phone suddenly stpped working when i was in a call. It was 90% charged. It never turned on. I checked this post but the pc can't detect it whatever i did. No signs of charging.when charging through power bank, bank turns off automatically after 1 min. help me please. I vant afford new phone ??

For issues with hardbricked phones of this model ,send me a private message ,maybe i can help if the issue is not a hardware one.

jide1 said:

For issues with hardbricked phones of this model ,send me a private message ,maybe i can help if the issue is not a hardware one.

how do i contact you?

i have max pro m1, and i bricked and repaired it.

then i lost mac address, imei number and bluetooth address but also fixed it.

but now i am having problem where i lost the serial number of the device, due to which. i cannot connect the phone to my p.c or laptop.

also, it does not detect any sim, and shows no sim card detected error even when sim is inserted.

pls help.

does anybody happen to know how much it will cost if i give my bootloader unlocked device to the service centre so that they can make my phone just like it came from the factory!

pls help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

yourkk said:

This thread is for those who's phone is hard bricked ( not even going to fast boot or recovery ). here we will explain how you can revive it.

things you need :-

1. QPST Tool - QPST Tool
2. QFIL Rom - ZB601KL/ZB602KL Download from HERE
3. Qcom drivers - Qcom drivers

First of all install QPST tool and drivers and extract QFIL rom after that go to QPST installed folder in my case that was C:\Program Files\Qualcomm\QPST\bin
open QFIL.exe

In Build type Select Flat Build


in Select Programmer go to that folder where u extracted Qfil rom.zip and select prog_emmc_ufs_firehose_Sdm660_ddr.elf


Now Click on Load xml and select rawprogram_unsparse_ww.xml in next window select patch0.xml
.

now Connect your device now if you see Something else like Qualcomm HS-USB Diagnostics in place of no port Selected Click DownLoad else check drivers.
it will take some time after process completes you can boot your phone and this rom is not meant for daily uses so flash any fastboot rom now.


Backing Up IMEI (QCN) ?


Restoring IMEI (QCN)


Editing QCN File :

Credits :
@Saktis_STi
- Akshat
@SagarMakhar
- Jakwarlord
And All who helped

Click to expand...

After this solution my zb602kl is 100% brick. The only reaction is (after pressin power button, trying fastboot mode or bootloader mode) almost invisible l\flash of screen and vibe. that's all. And no Qualcom connection.

Shreyastd said:

It worked thanks

Yes changing the .sn.bin worked but the problem was i didn't had that file, so i was trying if there is any other way as i looked the whole internet but found no .sn.bin file. Now i got it from jide1 and it worked. Thank you for the reply. :good:

---------- Post added at 07:58 AM ---------- Previous post was at 07:53 AM ----------

Thank you very much, i've been looking this file for maybe a week now. It worked, your awesome Thanks. :good: :good:

Click to expand...

Brother i request you May you please explain full procedure...
I'm also facing issue imei number and baseband version is restored still not able to get network...
I tried to downgrade from latest stable pie to oreo, cause this issue..

Hello, i could also use some help. i did the QFIL method a while ago when my phone was bricked and got it to work. restored IMEI afterwards, but haven't been able to change SN, so i've been running around for about a year with barely any mobile internet (only edge).

Yesterday i decided to finally try to fix it (maybe just go back to stock), but for some reason i started out by using QFIL and now Android does boot up but goes into an endless cycle of checking for updates. none of the solutions i found work, can't get past it to enable usb debugging or access storage. fastboot mode doesn't work either (gets stuck at android logo and says "press any key to shutdown"). recovery shows "couldn't load bitmap" error and isn't able to mount storage or connect with adb.
what to do with this mess?

Hi guis, how can i solution that i can only enter to fastboot mode and i cant unlock it.