7

Development - [ROM][13.0][hanoip] LineageOS 20.0 [AOSP][G60/G40F] | Page 4 | XDA...

 1 year ago
source link: https://forum.xda-developers.com/t/rom-13-0-hanoip-lineageos-20-0-aosp-g60-g40f.4450789/page-4#post-87527121
Go to the source link to view the article. You can view the picture content, updated content and better typesetting reading experience. If the link is broken, please click the button below to view the snapshot at that time.
neoserver,ios ssh client

Development [ROM][13.0][hanoip] LineageOS 20.0 [AOSP][G60/G40F]

dhinesh_cool

Senior Member
Jan 17, 2018
Absolutely ridiculous. But anyway get back to stock firmware and install lineage 20.0 from scratch. That's the reason for safer side we ( our internal team tested on couple of old firmwares/new firmwares so no point of worrying about stock rom or may be something went wrong with your hardware level ) last we don't bother about any assurance on what went wrong because we don't release unless we use by our own hands.

Cheers 🥂

This why wrong if your small team cannot find then it is not a bug?
First of all it is common bug on most of moto phone that why everyone using copy-partition.zip just don't avoid If it is not happen to you

dhinesh_cool

Senior Member
Jan 17, 2018
I see... Thank you very much for the explanation! I never had this issue on any of my devices. And I had a couple of devices from different brands. Never had this issue. But good to know! Thank you for the info!

I brick my moto g5plus by this same issue
Fortunately when working on x4 I took backup of persist , i lost imei but luckly i fixed by restoring backup, i found out this issue happen mostly when moto update major Android version

dhinesh_cool

Senior Member
Jan 17, 2018
So i recommend every rom user and dev to use updated firmware and blobs from moto this will prevent those issue

Raghu varma

Senior Member
Mar 22, 2017 1,289 Hyderabad
@raghuvarma this happens because of firmware mismatch ,this can be avoided by
Using latest firmware,then flash copy-partition.zip which flashes latest firmware on both slots then flash rom

Adjust instructions like this it will reduce this kind of things

For positive points i always support. sure why not , i will definitely implement once i test from my end.

dhinesh_cool

Senior Member
Jan 17, 2018
For positive points i always support. sure why not , i will definitely implement once i test from my end.

Well i affected by this lot and seen lot of moto device broken so kindly add to prevent that

Reactions: Raghu varma

dhinesh_cool

Senior Member
Jan 17, 2018
And one more things remove ipa stuffs from your vendor that will brick moto devices we recently found out
@Raghu varma can i flash this rom over my pixel experience 12 rom with existing recovery without using laptop or computer.....or any process to flash this rom without the help of laptop or computer....i want to badly use this rom...i cant wait more..pls help..
@arsradu pls comment

Raghu varma

Senior Member
Mar 22, 2017 1,289 Hyderabad
@Raghu varma can i flash this rom over my pixel experience 12 rom with existing recovery without using laptop or computer.....or any process to flash this rom without the help of laptop or computer....i want to badly use this rom...i cant wait more..pls help..
@arsradu pls comment

Always proceed with computer with proper steps linked in the main thread. so don't take risk through recovery

Always proceed with computer with proper steps linked in the main thread. so don't take risk through recovery

So no way without computer?

@Raghu varma can i flash this rom over my pixel experience 12 rom with existing recovery without using laptop or computer.....or any process to flash this rom without the help of laptop or computer....i want to badly use this rom...i cant wait more..pls help..
@arsradu pls comment

You could, if you were using an SD card.
Otherwise, you need adb, which means a computer with data cable.
But I'm not sure if you can just flash this ROM on top of the other without wiping anything.i mean, you can. But I'm not sure if would be recommended.

You could, if you were using an SD card.
Otherwise, you need adb, which means a computer with data cable.
But I'm not sure if you can just flash this ROM on top of the other without wiping anything.i mean, you can. But I'm not sure if would be recommended.

I am not using sd card.....so can i flash it over the existing rom with existing recovery of pixel experience rom

I am not using sd card.....so can i flash it over the existing rom with existing recovery of pixel experience rom

No

I am not using sd card.....so can i flash it over the existing rom with existing recovery of pixel experience rom

You could. You can flash the ROM and wipe your data partition at the end of the flashing process. BUT BE CAREFUL. Be prepared if something goes wrong. You are going to need a PC to recover your phone if the device gets soft bricked.

It is better to wait until you have a trustable computer to do the corresponding procedure.

You could. You can flash the ROM and wipe your data partition at the end of the flashing process. BUT BE CAREFUL. Be prepared if something goes wrong. You are going to need a PC to recover your phone if the device gets soft bricked.

It is better to wait until you have a trustable computer to do the corresponding procedure.

I will flash now without a computer...god hopes nothing happens....

Top Liked Posts

  • After flashing the Lineage 20.0 build I have lost the EMEI numbers on my Indian G40 fusion.

    Can anybody direct to the modem/radio files that will help me solve this issue?

    Absolutely ridiculous. But anyway get back to stock firmware and install lineage 20.0 from scratch. That's the reason for safer side we ( our internal team tested on couple of old firmwares/new firmwares so no point of worrying about stock rom or may be something went wrong with your hardware level ) last we don't bother about any assurance on what went wrong because we don't release unless we use by our own hands.

    Cheers 🥂

    Alternatively, you can download a somewhat newer version from here. Not sure why there's only Android 11 for this model, but that's beside the point.
    Thanks. This is what I needed.

    I am now able to use the SIM after flashing the radio img file
    Absolutely ridiculous. But anyway get back to stock firmware and install lineage 20.0 from scratch. That's the reason for safer side we ( our internal team tested on couple of old firmwares/new firmwares so no point of worrying about stock rom or may be something went wrong with your hardware level ) last we don't bother about any assurance on what went wrong because we don't release unless we use by our own hands.

    Cheers 🥂
    I did not meant to question the quality of ROM. I might have fiddled around something while installing the previous ROM and may not have noticed at that time as this is my backup phone.

    Anyways great work on the rom! I hope you keep on to do such quality work.

    Cheers. 🥃
    I'm not sure how this would happen. But anyway...

    1. You can download stock ROM using LMSA's Rescue feature (phone connected, in fastboot mode).

    Alternatively, you can download a somewhat newer version from here. Not sure why there's only Android 11 for this model, but that's beside the point.

    In case the mirror site doesn't have the latest versions uploaded, my main recommendation would be to use LMSA! That should give you the correct firmware for your device.

    2. After the ROM has been downloaded, open the folder, see if you have radio.img.

    3. If you do, you're gonna need Platform Tools from here (in case you don't have it already).

    4. Copy radio.img file from stock ROM folder to the platform-tools folder.

    5. Open a cmd prompt into that platform-tools folder, then check if fastboot is working, with command:
    fastboot devices

    It should show your serial number followed by the word "fastboot".

    6. To flash radio, you need to do this command:
    fastboot flash radio radio.img

    This assumes that your radio.img file is present inside the platform-tools folder (step 4).

    That's about it.

    You can now do a

    fastboot reboot

    to reboot the phone.
    Or you can manually reboot it by selecting Reboot (with Volume Up/Down keys) and pressing the Power button.

    I'm not gonna go into details of what is LMSA, how to install that, how to install platform-tools, how to open cmd prompt to a specific folder, how to add platform-tools to PATH and all that. Please, use google for that. Or you can go through the last pages from this thread. I'm not going through that again.

    This happens because firmware mis matched with modem common problem with moto devices fix is easy everytime when u unlocked bootloader on moto device take your persist and modem backup,if this symptoms occurs just restore backup it will save and this things is serious if you flash wrong modem or persist it will brick persist you cannot recover from that

    For positive points i always support. sure why not , i will definitely implement once i test from my end.

    Well i affected by this lot and seen lot of moto device broken so kindly add to prevent that


About Joyk


Aggregate valuable and interesting links.
Joyk means Joy of geeK