Windows环境下的安装

下载与安装

1.访问地址: https://zookeeper.apache.org/releases.html#download下载需要的ZK版本，下载到本地后解压。

2.在解压目录下面新建一个空的 data 文件夹和 log 文件夹

在Windows环境与Linux环境下搭建Zookeeper单机环境与集群环境_Windows

将 conf 目录下的 zoo_sample.cfg 文件，复制一份，重命名为 zoo.cfg

在Windows环境与Linux环境下搭建Zookeeper单机环境与集群环境_Linux_02

修改 zoo.cfg 配置文件，将 dataDir=/tmp/zookeeper 修改成 zookeeper 安装目录所在的 data 文件夹，再添加一条添加数据日志的配置

# The number of milliseconds of each tick
tickTime=2000
# The number of ticks that the initial 
# synchronization phase can take
initLimit=10
# The number of ticks that can pass between 
# sending a request and getting an acknowledgement
syncLimit=5
# the directory where the snapshot is stored.
# do not use /tmp for storage, /tmp here is just 
# example sakes.
dataDir=D:\Development\apache-zookeeper-3.6.3-bin\data
dataLogDir=D:\Development\apache-zookeeper-3.6.3-bin\log
# the port at which the clients will connect
clientPort=2181
# the maximum number of client connections.
# increase this if you need to handle more clients
#maxClientCnxns=60
#
# Be sure to read the maintenance section of the 
# administrator guide before turning on autopurge.
#
# http://zookeeper.apache.org/doc/current/zookeeperAdmin.html#sc_maintenance
#
# The number of snapshots to retain in dataDir
#autopurge.snapRetainCount=3
# Purge task interval in hours
# Set to "0" to disable auto purge feature
#autopurge.purgeInterval=1

## Metrics Providers
#
# https://prometheus.io Metrics Exporter
#metricsProvider.className=org.apache.zookeeper.metrics.prometheus.PrometheusMetricsProvider
#metricsProvider.httpPort=7000
#metricsProvider.exportJvmInfo=true

双击bin目录下的zkServer.cmd启动即可

在Windows环境与Linux环境下搭建Zookeeper单机环境与集群环境_Windows_03

zookeeper新版本中有个内嵌的管理控制台是通过jetty启动，会占用8080 端口

在Windows环境与Linux环境下搭建Zookeeper单机环境与集群环境_Zookeeper_04

解决方法

1.修改端口

在zoo.cfg中增加admin.serverPort=没有被占用的端口号

admin.serverPort=8088

2.修改启动脚本

在启动脚本中增加"-Dzookeeper.admin.enableServer=false"

"-Dzookeeper.admin.enableServer=false"

Linux环境下的安装

下载与安装

访问地址: https://zookeeper.apache.org/releases.html#download下载需要的ZK版本

wget https://downloads.apache.org/zookeeper/zookeeper-3.7.0/apache-zookeeper-3.7.0-bin.tar.gz

解压zookeeper

[root@administrator conf]#	tar -zxvf apache-zookeeper-3.7.0-bin.tar.gz

[root@administrator conf]#	mv tar -zxvf apache-zookeeper-3.7.0-bin zookeeper

移动zookeeper位置

[root@administrator conf]# cp zookeeper  /usr/local/

修改zoo_sample.cfg文件

[root@administrator conf]# cd /usr/local/zookeeper/conf
[root@administrator conf]# mv zoo_sample.cfg zoo.cfg

# The number of milliseconds of each tick
# 基本事件单元，以毫秒为单位。它用来控制心跳和超时，默认情况下最小的会话超时时间为两个心跳时间
tickTime=2000
# The number of ticks that the initial 
# synchronization phase can take
# 用于限制follower跟随者服务器必须连接到leader领导者服务器的时限
# 多少个心跳时间内，允许其他server连接并初始化数据，如果ZooKeeper管理的数据较大，则应相应增大这个值
# 它以tickTime的倍数来表示。当超过设置倍数的tickTime时间，则连接失败
initLimit=10
# The number of ticks that can pass between 
# sending a request and getting an acknowledgement
# leader与follower之间发送消息，请求和应答时间长度。
# 如果follower在设置的时间内不能与leader进行通信，那么此follower将被丢弃。
syncLimit=5
# the directory where the snapshot is stored.
# do not use /tmp for storage, /tmp here is just 
# example sakes.
#dataDir=/tmp/zookeeper
#存储内存数据库快照的位置
dataDir=/usr/local/zookeeper/data
# the port at which the clients will connect
# 监听客户端连接的端口，默认是2181
clientPort=2181
# the maximum number of client connections.
# increase this if you need to handle more clients
#maxClientCnxns=60
#
# Be sure to read the maintenance section of the 
# administrator guide before turning on autopurge.
#
# http://zookeeper.apache.org/doc/current/zookeeperAdmin.html#sc_maintenance
#
# The number of snapshots to retain in dataDir
#autopurge.snapRetainCount=3
# Purge task interval in hours
# Set to "0" to disable auto purge feature
#autopurge.purgeInterval=1

## Metrics Providers
#
# https://prometheus.io Metrics Exporter
#metricsProvider.className=org.apache.zookeeper.metrics.prometheus.PrometheusMetricsProvider
#metricsProvider.httpPort=7000
#metricsProvider.exportJvmInfo=true

创建data目录

[root@administrator conf]# cd /usr/local/zookeeper/
[root@administrator zookeeper]# mkdir data

注意：zookeeper需要依赖jdk环境

[root@administrator bin]# cd /usr/local/zookeeper/bin
[root@administrator bin]# ./zkServer.sh start
/usr/bin/java
ZooKeeper JMX enabled by default
Using config: /usr/local/zookeeper/bin/../conf/zoo.cfg
Starting zookeeper ... STARTED
[root@administrator bin]#

查看启动状态

[root@administrator bin]# ./zkServer.sh status
/usr/bin/java
ZooKeeper JMX enabled by default
Using config: /usr/local/zookeeper/bin/../conf/zoo.cfg
Client port found: 2181. Client address: localhost. Client SSL: false.
Mode: standalone

[root@administrator bin]# ./zkServer.sh stop

[root@administrator bin]# ./zkCli.sh -server 127.0.0.1:2181

[zk: 127.0.0.1:2181(CONNECTED) 8] ls
ls [-s] [-w] [-R] path

退出客户端

[zk: 127.0.0.1:2181(CONNECTED) 0] quit

搭建Zookeeper集群环境

搭建Zookeeper集群至少需要三台服务器，且服务器之间系统时间保持一致，三台服务器中一个leader和两个follower

下载与安装

[root@node001 zookeeper]# wget https://downloads.apache.org/zookeeper/zookeeper-3.7.0/apache-zookeeper-3.7.0-bin.tar.gz

解压并重命名

[root@node001 zookeeper]# tar -zxvf apache-zookeeper-3.7.0-bin.tar.gz

[root@node001 zookeeper]# mv apache-zookeeper-3.7.0-bin zookeeper

创建data目录

[root@node001 zookeeper]# cd zookeeper

[root@node001 zookeeper]# mkdir data

创建myid文件，填写每个节点编号(node001 ==> 1)，需唯一。

[root@node001 zookeeper]# cd data
[root@node001 zookeeper]# vim myid

1

配置zoo.cfg

[root@node001 zookeeper]# cd conf/

[root@node001 zookeeper]# mv zoo_sample.cfg zoo.cfg

[root@node001 zookeeper]# vim zoo.cfg

# The number of milliseconds of each tick
# 心跳时间
tickTime=2000
# The number of ticks that the initial
# synchronization phase can take
# 用于限制follower跟随者服务器必须连接到leader领导者服务器的时限
# 多少个心跳时间内，允许其他server连接并初始化数据，如果ZooKeeper管理的数据较大，则应相应增大这个值
initLimit=10
# The number of ticks that can pass between
# sending a request and getting an acknowledgement
# 集群中Leader与Follower之间的最大响应时间单位
# 多少个tickTime内，允许follower同步，如果follower落后太多，则会被丢弃。
syncLimit=5
# the directory where the snapshot is stored.
# do not use /tmp for storage, /tmp here is just
# example sakes.
# 修改数据存储路径
# 存储内存数据库快照的位置
dataDir=/usr/local/program/zookeeper/data
# the port at which the clients will connect
# 用于侦听客户端连接的端口
clientPort=2181
# the maximum number of client connections.
# increase this if you need to handle more clients
#maxClientCnxns=60
#
# Be sure to read the maintenance section of the
# administrator guide before turning on autopurge.
#
# http://zookeeper.apache.org/doc/current/zookeeperAdmin.html#sc_maintenance
#
# The number of snapshots to retain in dataDir
#autopurge.snapRetainCount=3
# Purge task interval in hours
# Set to "0" to disable auto purge feature
#autopurge.purgeInterval=1

## Metrics Providers
#
# https://prometheus.io Metrics Exporter
#metricsProvider.className=org.apache.zookeeper.metrics.prometheus.PrometheusMetricsProvider
#metricsProvider.httpPort=7000
#metricsProvider.exportJvmInfo=true

#3台服务器的地址
# server.A=B:C:D
# 添加集群配置
server.1=node001:2888:3888
server.2=node002:2888:3888
server.3=node003:2888:3888

A ：一个数字，表示是第几号服务器

B：服务器的地址

C：服务器Follower与集群中的Leader服务器交换信息的端口

D：万一集群中的Leader服务器挂了，需要一个端口来重新进行选举一个新的Leader，而这个端口就是用来执行选举时服务器相互通信的端口。

分发到其他节点

scp -r zookeeper node002:/usr/local/program/zookeeper

scp -r zookeeper node003:/usr/local/program/zookeeper

修改分发Zookeeper机器的myid编号，分别为2，3

[root@node002 zookeeper]# vim data/myid 
2

[root@node003 zookeeper]# vim data/myid 
3

[root@node001 zookeeper]# bin/zkServer.sh start
ZooKeeper JMX enabled by default
Using config: /usr/local/program/zookeeper/bin/../conf/zoo.cfg
Starting zookeeper ... STARTED

[root@node002 zookeeper]# bin/zkServer.sh start
ZooKeeper JMX enabled by default
Using config: /usr/local/program/zookeeper/bin/../conf/zoo.cfg
Starting zookeeper ... STARTED


[root@node003 zookeeper]# bin/zkServer.sh start
ZooKeeper JMX enabled by default
Using config: /usr/local/program/zookeeper/bin/../conf/zoo.cfg
Starting zookeeper ... STARTED

查看集群状态

[root@node001 zookeeper]# bin/zkServer.sh status
ZooKeeper JMX enabled by default
Using config: /usr/local/program/zookeeper/bin/../conf/zoo.cfg
Client port found: 2181. Client address: localhost. Client SSL: false.
Mode: leader

[root@node002 zookeeper]# bin/zkServer.sh status
ZooKeeper JMX enabled by default
Using config: /usr/local/program/zookeeper/bin/../conf/zoo.cfg
Client port found: 2181. Client address: localhost. Client SSL: false.
Mode: follower

[root@node003 zookeeper]# bin/zkServer.sh status
ZooKeeper JMX enabled by default
Using config: /usr/local/program/zookeeper/bin/../conf/zoo.cfg
Client port found: 2181. Client address: localhost. Client SSL: false.
Mode: follower

[root@node001 hadoop]# jps
18946 QuorumPeerMain
19675 Jps

[root@node002 hadoop]# jps
21860 QuorumPeerMain
22095 Jps

[root@node003 hadoop]# jps
25607 Jps
25547 JournalNode

命令	作用
zkServer.sh start/stop	启动/关闭服务
zkCli.sh start/stop	启动/关闭客户端
zkServer.sh status	查看状态（leader/follower）
bin/zkCli.sh	连接本机zk
zkCli.sh -server node001:2181	连接其他zk服务器
status /zk	查看/zk节点的状态信息

节点ZNode的创建

命令	作用
create /zk mydata	创建znode节点，永久+不带序号
create -e /zk mydata	创建临时znode节点
create -s /zk mydata	创建顺序znode节点
create -e -s /zk mydata	创建临时的顺序znode节点

节点ZNode的查询

命令	作用
ls /zk	查看znode子节点列表
ls /zk watch	对一个节点的子节点变化事件注册了监听
get /zk	获取znode数据
get /zk watch	对一个节点的数据内容变化事件注册了监听

节点ZNode的修改与删除

命令	作用
set /zk value	设置znode数据
delete /zk	只能删除没有子znode的znode
rmr /zk	删除znode的znode,递归删除

数据信息字段

znode数据信息字段的解释

cZxid = 0x1000fe0597c0002 节点创建的时候的zxid
# The zxid of the change that caused this znode to be created.

ctime = Fri Dec 02 16:41:50 PST 2022 节点创建的时间
# The time in milliseconds from epoch when this znode was created.

mZxid = 0x1000fe0597c0002 节点修改的时候的zxid，与子节点的修改无关
# The zxid of the change that last modified this znode.

mtime = Fri Dec 02 16:41:50 PST 2022 节点的修改的时间
# The time in milliseconds from epoch when this znode was last modified.

pZxid = 0x1000fe0597c0002 和子节点的创建/删除对应的zxid，和修改无关，和孙子节点无关
# The zxid of the change that last modified children of this znode.

cversion = 0 子节点的更新次数
# The number of changes to the children of this znode.

dataVersion = 0 节点数据的更新次数
# The number of changes to the data of this znode.

aclVersion = 0 节点（ACL）的更新次数
# The number of changes to the ACL of this znode.

ephemeralOwner = 0x0 如果该节点为ephemeral节点, ephemeralOwner值表示与该节点绑定的
session id. 如果该节点不是ephemeral节点, ephemeralOwner值为0
# The session id of the owner of this znode if the znode is an ephemeral node.
If it is not an ephemeral node, it will be zero.

dataLength = 6 节点数据的字节数
# The length of the data field of this znode.

numChildren = 0 子节点个数，不包含孙子节点
# The number of children of this znode.

在Windows环境与Linux环境下搭建Zookeeper单机环境与集群环境

Windows环境下的安装

下载与安装

Linux环境下的安装

下载与安装

搭建Zookeeper集群环境

下载与安装

分发到其他节点

查看集群状态

节点ZNode的创建

节点ZNode的查询

节点ZNode的修改与删除

数据信息字段

Recommend

[ Linux ] 进程概念，pcb，查看进程，pid，ppid，fork

CleanCarbon CEO：CleanCarbon 将是有效结合区块链及解决垃圾问题的项目之一

售价超20万元！LG推出全球最大OLED电视

Propulseapp - Make your company shine with the experience of your talents | Prod...

万向区块链肖风：预计区块链将于 2025 年开始应用大爆发

拆解报告：realme 10000mAh 33W闪充移动电源

The uptime monitoring tool for the Web in your CLI

教育部：深化农林教育供给侧改革，引领有条件的高校设置新农科专业

Crunchbase People - One click to founders LinkedIn from Crunchbase | Product Hun...

4 Tips for fitting in your new design Job

About Joyk