4
G019-OP-INS-RHEL-01 PackStack 安装 RedHat OpenStack
source link: https://blog.51cto.com/cloudcs/5279310
Go to the source link to view the article. You can view the picture content, updated content and better typesetting reading experience. If the link is broken, please click the button below to view the snapshot at that time.
G019-OP-INS-RHEL-01 PackStack 安装 RedHat OpenStack
推荐 原创1 您需要了解
- 因是红帽特定版本，故无法使用其他 Linux 版本进行替代
- 系统及源版本：
rhel-server-7.1-x86_64-dvd.isoRHEL7OSP-6.0-2015-02-23.2-x86_64.iso - 您可参考 G017-OS-LIN-RHEL-02 红帽 7.1 安装 一文进行操作系统安装
- RHEL 7.1 图形化对于
AMD cpu及某些硬件平台不兼容问题，可采用最小化安装方式来处理 - 虚拟化平台版本
VMware Workstation 16.2.0 - 环境需用到
3台虚拟机，并为其配置静态 IP，具体规划请参考第 2 章环境规划 - 本篇安装流程适用于
Server with GUI及Minimal Install
2 环境规划
控制节点及计算节点必须开启虚拟化引擎
Intel VT-x或AMD-V，且控制节点未来将被复用为计算节点；虚拟机配置可根据实际情况进行调整；务必配置 DNS，否则安装过程会出错
| 主机名 | IP | 网关 / DNS | CPU / 内存 | 磁盘 | 角色 | 备注 |
|---|---|---|---|---|---|---|
| controller | 192.168.45.150 / 24 | 192.168.45.1 | 4核 16G | 100 G | 控制节点 | 必须开启虚拟化引擎 |
| compute | 192.168.45.151 / 24 | 192.168.45.1 | 4核 16G | 100 G | 计算节点 | 必须开启虚拟化引擎 |
| ntp | 192.168.45.152 / 24 | 192.168.45.1 | 1核 4G | 50 G | NTP时钟源 | 必须单独部署 |
3 环境配置
3.1 关闭 DNS 反向解析
实验测试环境建议关闭主机名的反向解析，加速三方工具连接
[root@controller ~]# vim /etc/ssh/sshd_config
[root@compute ~]# vim /etc/ssh/sshd_config
[root@ntp ~]# vim /etc/ssh/sshd_config
查找行 #UseDNS yes，修改为 UseDNS no，保存退出并重启服务
[root@controller ~]# systemctl restart sshd
[root@compute ~]# systemctl restart sshd
[root@ntp ~]# systemctl restart sshd
3.2 （仅 Minimal）配置本地YUM源
- controller 控制节点
[root@controller ~]# mount /dev/cdrom /mnt/
[root@controller ~]# ls /mnt/
[root@controller ~]# rm -rf /etc/yum.repos.d/*
[root@controller ~]# vim /etc/yum.repos.d/dvd.repo
[root@controller ~]# cat /etc/yum.repos.d/dvd.repo
[dvd]
name = dvd
baseurl = file:///mnt/
gpgcheck = 0
enabled = 1
[root@controller ~]# yum repolist all
- comopute 计算节点
[root@compute ~]# mount /dev/cdrom /mnt/
mount: /dev/sr0 is write-protected, mounting read-only
[root@compute ~]# ls /mnt/
addons EFI EULA GPL images isolinux LiveOS media.repo Packages release-notes repodata RPM-GPG-KEY-redhat-beta RPM-GPG-KEY-redhat-release TRANS.TBL
[root@compute ~]# rm -rf /etc/yum.repos.d/*
[root@compute ~]# vim /etc/yum.repos.d/dvd.repo
[root@compute ~]# cat /etc/yum.repos.d/dvd.repo
[dvd]
name = dvd
baseurl = file:///mnt/
gpgcheck = 0
enabled = 1
[root@compute ~]# yum repolist all
- ntp 时钟源节点
[root@ntp ~]# mount /dev/cdrom /mnt/
mount: /dev/sr0 is write-protected, mounting read-only
[root@ntp ~]# ls /mnt/
addons EFI EULA GPL images isolinux LiveOS media.repo Packages release-notes repodata RPM-GPG-KEY-redhat-beta RPM-GPG-KEY-redhat-release TRANS.TBL
[root@ntp ~]#
[root@ntp ~]# rm -rf /etc/yum.repos.d/*
[root@ntp ~]# vim /etc/yum.repos.d/dvd.repo
[root@ntp ~]# cat /etc/yum.repos.d/dvd.repo
[dvd]
name = dvd
baseurl = file:///mnt/
gpgcheck = 0
enabled = 1
[root@ntp ~]# yum repolist all
3.3 （仅 Minimal）安装所需包资源
controller/compute/ntp分别执行
yum install -y lrzsz \
vim \
bash-completion \
net-tools \
openssl \
openssl-devel \
chrony.x86_64 \
zip \
unzip \
ntpdate \
telnet
- 加载新的环境变量以实现自动补全
source /etc/profile.d/bash_completion.sh
3.4 IP及主机名
- 将ip地址及对应主机名写入
hosts文件
[root@controller ~]# vim /etc/hosts
[root@controller ~]# cat /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.45.150 controller
192.168.45.151 compute
192.168.45.152 ntp
- 将文件拷贝至其
compute及ntp节点
[root@controller ~]# scp /etc/hosts root@compute:/etc/
[root@controller ~]# scp /etc/hosts root@ntp:/etc/
3.5 网络设置
controller/compute/ntp分别执行
3.5.1 关闭防火墙
[root@controller ~]# systemctl stop firewalld.service
[root@controller ~]# systemctl disable firewalld.service
[root@compute ~]# systemctl stop firewalld.service
[root@compute ~]# systemctl disable firewalld.service
[root@ntp ~]# systemctl stop firewalld.service
[root@ntp ~]# systemctl disable firewalld.service
3.5.2 关闭 NetworkManager
[root@controller ~]# systemctl stop NetworkManager.service
[root@controller ~]# systemctl disable NetworkManager
[root@compute ~]# systemctl stop NetworkManager.service
[root@compute ~]# systemctl disable NetworkManager
[root@ntp ~]# systemctl stop NetworkManager.service
[root@ntp ~]# systemctl disable NetworkManager
3.5.3 关闭 SELinux
[root@controller ~]# setenforce 0
[root@controller ~]# vim /etc/selinux/config
[root@controller ~]# cat /etc/selinux/config
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
# enforcing - SELinux security policy is enforced.
# permissive - SELinux prints warnings instead of enforcing.
# disabled - No SELinux policy is loaded.
SELINUX=disabled
# SELINUXTYPE= can take one of three two values:
# targeted - Targeted processes are protected,
# minimum - Modification of targeted policy. Only selected processes are protected.
# mls - Multi Level Security protection.
SELINUXTYPE=targeted
[root@compute ~]# setenforce 0
[root@compute ~]# vim /etc/selinux/config
[root@compute ~]# cat /etc/selinux/config
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
# enforcing - SELinux security policy is enforced.
# permissive - SELinux prints warnings instead of enforcing.
# disabled - No SELinux policy is loaded.
SELINUX=disabled
# SELINUXTYPE= can take one of three two values:
# targeted - Targeted processes are protected,
# minimum - Modification of targeted policy. Only selected processes are protected.
# mls - Multi Level Security protection.
SELINUXTYPE=targeted
[root@ntp ~]# setenforce 0
[root@ntp ~]# vim /etc/selinux/config
[root@ntp ~]# cat /etc/selinux/config
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
# enforcing - SELinux security policy is enforced.
# permissive - SELinux prints warnings instead of enforcing.
# disabled - No SELinux policy is loaded.
SELINUX=disabled
# SELINUXTYPE= can take one of three two values:
# targeted - Targeted processes are protected,
# minimum - Modification of targeted policy. Only selected processes are protected.
# mls - Multi Level Security protection.
SELINUXTYPE=targeted
3.6 NTP节点配置 OpenStack YUM 源
- 创建目录并上传
iso
[root@ntp ~]# mkdir /iso_images
[root@ntp ~]# ls -lathr /iso_images/
total 4.2G
-rw-r--r--. 1 root root 3.7G Oct 10 2021 rhel-server-7.1-x86_64-dvd.iso
-rw-r--r--. 1 root root 515M Oct 11 2021 RHEL7OSP-6.0-2015-02-23.2-x86_64.iso
dr-xr-xr-x. 18 root root 4.0K May 7 10:04 ..
drwxr-xr-x. 2 root root 86 May 7 10:07 .
- 安装
httpd并启动服务
[root@ntp ~]# yum install -y httpd
[root@ntp ~]# systemctl start httpd
[root@ntp ~]# systemctl enable httpd
ln -s '/usr/lib/systemd/system/httpd.service' '/etc/systemd/system/multi-user.target.wants/httpd.service'
[root@ntp ~]# systemctl status httpd
- 创建目录并挂载源镜像
[root@ntp ~]# cd /var/www/html/
[root@ntp html]# mkdir dvd
[root@ntp html]# mkdir openstack
[root@ntp html]# ls
dvd openstack
[root@ntp html]# vim /etc/fstab
[root@ntp html]# cat /etc/fstab
#
# /etc/fstab
# Created by anaconda on Mon Oct 11 09:42:19 2021
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
UUID=477f8276-f5d9-42bf-840e-a3427f1678e8 / xfs defaults 0 0
UUID=2f5ba703-2dfd-443a-8037-a9ea781d6d1e /boot xfs defaults 0 0
UUID=47406d37-7e5a-4109-bda9-daf53ba760b9 swap swap defaults 0 0
/iso_images/rhel-server-7.1-x86_64-dvd.iso /var/www/html/dvd iso9660 defaults 0 0
/iso_images/RHEL7OSP-6.0-2015-02-23.2-x86_64.iso /var/www/html/openstack iso9660 defaults 0 0
[root@ntp html]# mount -a
mount: /dev/loop0 is write-protected, mounting read-only
mount: /dev/loop1 is write-protected, mounting read-only
[root@ntp html]# df -Th
Filesystem Type Size Used Avail Use% Mounted on
/dev/sda3 xfs 42G 8.4G 34G 21% /
devtmpfs devtmpfs 2.0G 0 2.0G 0% /dev
tmpfs tmpfs 2.0G 84K 2.0G 1% /dev/shm
tmpfs tmpfs 2.0G 8.9M 2.0G 1% /run
tmpfs tmpfs 2.0G 0 2.0G 0% /sys/fs/cgroup
/dev/sda1 xfs 497M 105M 393M 22% /boot
/dev/sr0 iso9660 3.7G 3.7G 0 100% /mnt
/dev/loop0 iso9660 3.7G 3.7G 0 100% /var/www/html/dvd
/dev/loop1 iso9660 515M 515M 0 100% /var/www/html/openstack
[root@ntp html]# ls dvd/
addons EFI EULA GPL images isolinux LiveOS media.repo Packages release-notes repodata RPM-GPG-KEY-redhat-beta RPM-GPG-KEY-redhat-release TRANS.TBL
[root@ntp html]# ls openstack/
RH7-RHOS-6.0 RH7-RHOS-6.0-Installer RHEL7-Errata RHEL-7-RHSCL-1.2 version.txt
- 配置 openstack yum 源
[root@ntp ~]# rm -rf /etc/yum.repos.d/*
[root@ntp ~]# vim /etc/yum.repos.d/openstack.repo
[root@ntp ~]# cat /etc/yum.repos.d/openstack.repo
[rheliso]
name = rheliso
baseurl = http://192.168.45.152/dvd/
gpgcheck = 0
enabled = 1
[RH7-RHOS-6.0]
name = RH7-RHOS-6.0
baseurl = http://192.168.45.152/openstack/RH7-RHOS-6.0
gpgcheck = 0
enabled = 1
[RH7-RHOS-6.0-Installer]
name = RH7-RHOS-6.0-Installer
baseurl = http://192.168.45.152/openstack/RH7-RHOS-6.0-Installer
gpgcheck = 0
enabled = 1
[RHEL7-Errata]
name = RHEL7-Errata
baseurl = http://192.168.45.152/openstack/RHEL7-Errata
gpgcheck = 0
enabled = 1
[RHEL-7-RHSCL-1.2]
name = RHEL-7-RHSCL-1.2
baseurl = http://192.168.45.152/openstack/RHEL-7-RHSCL-1.2
gpgcheck = 0
enabled = 1
[root@ntp ~]# yum repolist all
Loaded plugins: langpacks, product-id, subscription-manager
This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
RH7-RHOS-6.0 | 1.3 kB 00:00:00
RH7-RHOS-6.0-Installer | 1.2 kB 00:00:00
RHEL-7-RHSCL-1.2 | 3.3 kB 00:00:00
RHEL7-Errata | 2.9 kB 00:00:00
rheliso | 4.1 kB 00:00:00
(1/6): RH7-RHOS-6.0/primary | 117 kB 00:00:00
(2/6): RH7-RHOS-6.0-Installer/primary | 47 kB 00:00:00
(3/6): RHEL7-Errata/primary_db | 10 kB 00:00:00
(4/6): RHEL-7-RHSCL-1.2/primary_db | 776 kB 00:00:00
(5/6): rheliso/primary_db | 3.4 MB 00:00:00
(6/6): rheliso/group_gz | 134 kB 00:00:00
RH7-RHOS-6.0 393/393
RH7-RHOS-6.0-Installer 194/194
repo id repo name status
RH7-RHOS-6.0 RH7-RHOS-6.0 enabled: 393
RH7-RHOS-6.0-Installer RH7-RHOS-6.0-Installer enabled: 194
RHEL-7-RHSCL-1.2 RHEL-7-RHSCL-1.2 enabled: 1,766
RHEL7-Errata RHEL7-Errata enabled: 11
rheliso rheliso enabled: 4,371
repolist: 6,735
- 将
repo文件拷贝至controller及compute节点
[root@controller ~]# rm -rf /etc/yum.repos.d/*
[root@controller ~]# scp root@ntp:/etc/yum.repos.d/openstack.repo /etc/yum.repos.d/
root@ntp's password:
openstack.repo 100% 593 0.6KB/s 00:00
[root@controller ~]# ls /etc/yum.repos.d/
openstack.repo
[root@compute ~]# rm -rf /etc/yum.repos.d/*
[root@compute ~]# scp root@ntp:/etc/yum.repos.d/openstack.repo /etc/yum.repos.d/
The authenticity of host 'ntp (192.168.45.152)' can't be established.
ECDSA key fingerprint is e2:bf:1b:53:43:a0:75:9f:5f:69:66:90:d7:d4:ae:0c.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'ntp,192.168.45.152' (ECDSA) to the list of known hosts.
root@ntp's password:
openstack.repo 100% 593 0.6KB/s 00:00
[root@compute ~]# ls /etc/yum.repos.d/
openstack.repo
3.7 配置 NTP 服务
3.7.1 配置 ntp 服务器端
ntp节点配置服务器端
[root@ntp ~]# systemctl restart chronyd.service
[root@ntp ~]# vim /etc/chrony.conf
[root@ntp ~]# cat /etc/chrony.conf
#server 0.rhel.pool.ntp.org iburst
#server 1.rhel.pool.ntp.org iburst
#server 2.rhel.pool.ntp.org iburst
#server 3.rhel.pool.ntp.org iburst
#allow 192.168/16
allow 192.168.45/24
# Serve time even if not synchronized to any NTP server.
local stratum 10
[root@ntp ~]# systemctl restart chronyd.service
3.7.2 配置 ntp 客户端
controller及compute节点配置客户端
[root@controller ~]# vim /etc/chrony.conf
[root@controller ~]# cat /etc/chrony.conf
#server 0.rhel.pool.ntp.org iburst
#server 1.rhel.pool.ntp.org iburst
#server 2.rhel.pool.ntp.org iburst
server ntp iburst
[root@controller ~]# systemctl restart chronyd.service
[root@compute ~]# vim /etc/chrony.conf
[root@compute ~]# cat /etc/chrony.conf
#server 0.rhel.pool.ntp.org iburst
#server 1.rhel.pool.ntp.org iburst
#server 2.rhel.pool.ntp.org iburst
server ntp iburst
[root@compute ~]# systemctl restart chronyd.service
3.7.3 手工测试 ntp 同步
controller及compute节点进行测试
[root@controller ~]# date
Sat May 7 11:18:25 CST 2022
[root@controller ~]# date -s "2018-01-01 12:00"
Mon Jan 1 12:00:00 CST 2018
[root@controller ~]# ntpdate ntp
7 May 11:18:58 ntpdate[36516]: step time server 192.168.45.152 offset 137114323.805103 sec
[root@controller ~]# date
Sat May 7 11:19:34 CST 2022
[root@compute ~]# date
Sat May 7 11:19:01 CST 2022
[root@compute ~]# date -s "2019-01-01 11:00:00"
Tue Jan 1 11:00:00 CST 2019
[root@compute ~]# ntpdate ntp
7 May 11:19:36 ntpdate[36536]: step time server 192.168.45.152 offset 105581963.931823 sec
[root@compute ~]# date
Sat May 7 11:19:44 CST 2022
4 安装配置
4.1 控制节点安装 PackStack
[root@controller ~]# yum install -y openstack-packstack
4.2 生成应答文件
[root@controller ~]# packstack -h |grep ans
--gen-answer-file=GEN_ANSWER_FILE
Generate a template of an answer file, using this
--answer-file=ANSWER_FILE
answerfile will also be generated and should be used
-o, --options Print details on options available in answer file(rst
second time with the same answer file and don't want
[root@controller ~]# packstack --gen-answer-file=/root/cloudcs.txt
如在执行 packstack 出现如下错误，请维护 DNS，并重启网卡
ERROR : Local IP address discovery failed. Please set nameserver correctly.
4.3 编辑应答文件
[root@controller ~]# vim cloudcs.txt
CONFIG_NTP_SERVERS=192.168.45.152
CONFIG_CONTROLLER_HOST=192.168.45.150
CONFIG_COMPUTE_HOSTS=192.168.45.150,192.168.45.151
CONFIG_KEYSTONE_REGION=WuHan
CONFIG_KEYSTONE_ADMIN_PW=redhat
CONFIG_HORIZON_SSL=y
CONFIG_PROVISION_DEMO=n
4.4 （仅 Server With GUI）重装 MariaDB
[root@controller ~]# yum remove -y mariadb
[root@controller ~]# yum install -y mariadb mariadb-server
Server with GUI 环境会自动安装 mariadb 组件，因依赖关系会导致安装时出现如下错误，解决方案重新安装 mariadb 即可
ERROR : Error appeared during Puppet run: 192.168.100.100_mariadb.pp
Error: Execution of '/usr/bin/rpm -e mariadb-server-5.5.41-2.el7_0.x86_64' returned 1: error: Failed dependencies
4.5 执行应答文件进行安装
指定应答文件回车，输入两次密码开始安装
[root@controller ~]# packstack --answer-file=/root/cloudcs.txt
安装过程输出
[root@controller ~]# packstack --answer-file=/root/cloudcs.txt
Welcome to the Packstack setup utility
The installation log file is available at: /var/tmp/packstack/20220507-114402-Uer_2L/openstack-setup.log
Installing:
Clean Up [ DONE ]
[email protected]'s password:
[email protected]'s password:
Setting up ssh keys [ DONE ]
Discovering hosts' details [ DONE ]
Adding pre install manifest entries [ DONE ]
Installing time synchronization via NTP [ DONE ]
Preparing servers [ DONE ]
Adding AMQP manifest entries [ DONE ]
Adding MariaDB manifest entries [ DONE ]
Adding Keystone manifest entries [ DONE ]
Adding Glance Keystone manifest entries [ DONE ]
Adding Glance manifest entries [ DONE ]
Adding Cinder Keystone manifest entries [ DONE ]
Checking if the Cinder server has a cinder-volumes vg[ DONE ]
Adding Cinder manifest entries [ DONE ]
Adding Nova API manifest entries [ DONE ]
Adding Nova Keystone manifest entries [ DONE ]
Adding Nova Cert manifest entries [ DONE ]
Adding Nova Conductor manifest entries [ DONE ]
Creating ssh keys for Nova migration [ DONE ]
Gathering ssh host keys for Nova migration [ DONE ]
Adding Nova Compute manifest entries [ DONE ]
Adding Nova Scheduler manifest entries [ DONE ]
Adding Nova VNC Proxy manifest entries [ DONE ]
Adding OpenStack Network-related Nova manifest entries[ DONE ]
Adding Nova Common manifest entries [ DONE ]
Adding Neutron API manifest entries [ DONE ]
Adding Neutron Keystone manifest entries [ DONE ]
Adding Neutron L3 manifest entries [ DONE ]
Adding Neutron L2 Agent manifest entries [ DONE ]
Adding Neutron DHCP Agent manifest entries [ DONE ]
Adding Neutron LBaaS Agent manifest entries [ DONE ]
Adding Neutron Metering Agent manifest entries [ DONE ]
Adding Neutron Metadata Agent manifest entries [ DONE ]
Checking if NetworkManager is enabled and running [ DONE ]
Adding OpenStack Client manifest entries [ DONE ]
Adding Horizon manifest entries [ DONE ]
Adding Swift Keystone manifest entries [ DONE ]
Adding Swift builder manifest entries [ DONE ]
Adding Swift proxy manifest entries [ DONE ]
Adding Swift storage manifest entries [ DONE ]
Adding Swift common manifest entries [ DONE ]
Adding MongoDB manifest entries [ DONE ]
Adding Redis manifest entries [ DONE ]
Adding Ceilometer manifest entries [ DONE ]
Adding Ceilometer Keystone manifest entries [ DONE ]
Adding Nagios server manifest entries [ DONE ]
Adding Nagios host manifest entries [ DONE ]
Adding post install manifest entries [ DONE ]
Installing Dependencies [ DONE ]
Copying Puppet modules and manifests [ DONE ]
Applying 192.168.45.150_prescript.pp
Applying 192.168.45.151_prescript.pp
192.168.45.151_prescript.pp: [ DONE ]
192.168.45.150_prescript.pp: [ DONE ]
Applying 192.168.45.150_chrony.pp
Applying 192.168.45.151_chrony.pp
192.168.45.150_chrony.pp: [ DONE ]
192.168.45.151_chrony.pp: [ DONE ]
Applying 192.168.45.150_amqp.pp
Applying 192.168.45.150_mariadb.pp
192.168.45.150_amqp.pp: [ DONE ]
192.168.45.150_mariadb.pp: [ DONE ]
Applying 192.168.45.150_keystone.pp
Applying 192.168.45.150_glance.pp
Applying 192.168.45.150_cinder.pp
192.168.45.150_keystone.pp: [ DONE ]
192.168.45.150_glance.pp: [ DONE ]
192.168.45.150_cinder.pp: [ DONE ]
Applying 192.168.45.150_api_nova.pp
192.168.45.150_api_nova.pp: [ DONE ]
Applying 192.168.45.150_nova.pp
Applying 192.168.45.151_nova.pp
192.168.45.150_nova.pp: [ DONE ]
192.168.45.151_nova.pp: [ DONE ]
Applying 192.168.45.150_neutron.pp
Applying 192.168.45.151_neutron.pp
192.168.45.151_neutron.pp: [ DONE ]
192.168.45.150_neutron.pp: [ DONE ]
Applying 192.168.45.150_osclient.pp
Applying 192.168.45.150_horizon.pp
192.168.45.150_osclient.pp: [ DONE ]
192.168.45.150_horizon.pp: [ DONE ]
Applying 192.168.45.150_ring_swift.pp
192.168.45.150_ring_swift.pp: [ DONE ]
Applying 192.168.45.150_swift.pp
192.168.45.150_swift.pp: [ DONE ]
Applying 192.168.45.150_mongodb.pp
Applying 192.168.45.150_redis.pp
192.168.45.150_mongodb.pp: [ DONE ]
192.168.45.150_redis.pp: [ DONE ]
Applying 192.168.45.150_ceilometer.pp
192.168.45.150_ceilometer.pp: [ DONE ]
Applying 192.168.45.150_nagios.pp
Applying 192.168.45.150_nagios_nrpe.pp
Applying 192.168.45.151_nagios_nrpe.pp
192.168.45.151_nagios_nrpe.pp: [ DONE ]
192.168.45.150_nagios.pp: [ DONE ]
192.168.45.150_nagios_nrpe.pp: [ DONE ]
Applying 192.168.45.150_postscript.pp
Applying 192.168.45.151_postscript.pp
192.168.45.150_postscript.pp: [ DONE ]
192.168.45.151_postscript.pp: [ DONE ]
Applying Puppet manifests [ DONE ]
Finalizing [ DONE ]
**** Installation completed successfully ******
Additional information:
* File /root/keystonerc_admin has been created on OpenStack client host 192.168.45.150. To use the command line tools you need to source the file.
* NOTE : A certificate was generated to be used for ssl, You should change the ssl certificate configured in /etc/httpd/conf.d/ssl.conf on 192.168.45.150 to use a CA signed cert.
* To access the OpenStack Dashboard browse to https://192.168.45.150/dashboard .
Please, find your login credentials stored in the keystonerc_admin in your home directory.
* To use Nagios, browse to http://192.168.45.150/nagios username: nagiosadmin, password: 916ff844dfc64eb1
* The installation log file is available at: /var/tmp/packstack/20220507-114402-Uer_2L/openstack-setup.log
* The generated manifests are available at: /var/tmp/packstack/20220507-114402-Uer_2L/manifests
5 完成安装
- 赞
- 收藏
- 评论
- 分享
- 举报
Recommend
About Joyk
Aggregate valuable and interesting links.
Joyk means Joy of geeK