4

Mercury 水星 多WAN口路由器应用举例—附加IP调度规则

 2 years ago
source link: https://service.mercurycom.com.cn/article-851.html
Go to the source link to view the article. You can view the picture content, updated content and better typesetting reading experience. If the link is broken, please click the button below to view the snapshot at that time.
neoserver,ios ssh client

多WAN口路由器应用举例—附加IP调度规则

某些应用环境比如企业或学校,既有自己的内部网络,同时又要访问Internet,选择多WAN口路由器同时接内部网络与Internet。如果不做相应设置,访问内部网络的数据可能会发往Internet,同样,访问Internet数据可能会发往内部网络,从而导致络无法正常访问。如何设置可以既可以正常内部网络,又可以正常访问Internet,本文将用一个实例来展示MR904B的解决方案和配置过程。

【需求介绍】

某公司内部网络为“10.0.0.0/24”,同时接Internet外线,现需要使用MR904B来实现网络中所有访问内部网络数据发往内部网络,访问外网的数据走Internet线路。

如图示:WAN1口接内部网络,WAN2口接Internet。

设置步骤:

1、设置WAN口网络参数以及上下行带宽:

网络参数>>WAN口设置:WAN口处分别选择”WAN口1”和”WAN口2”,设置相应的WAN口网络参数以及该线路的上下行带宽值。

注意:请如实填写线路的上行与下行带宽值!

201131192946396.jpg

2、设置负载均衡控制-附加IP地址调度规则:

(1) 网络参数>>负载均衡控制页面,启用WAN1,启用WAN2,并且”启用附加IP地址调度规则”:

201131193116219.jpg

(2) 点击附加IP地址调度规则,弹出以下对话框:

(3) 点击添加新条目,添加如下两条规则:

①、指定访问前端内部网“10.0.0.1—10.0.0.254”数据由WAN1转发:

②、指定访问所有网段的所有数据由WAN2口转发:


Recommend

About Joyk


Aggregate valuable and interesting links.
Joyk means Joy of geeK