3

树莓派命令行配置无线网络

 3 years ago
source link: https://www.cnblogs.com/MikeZhang/p/raspi-ubuntu-set-wlan-20200529.html
Go to the source link to view the article. You can view the picture content, updated content and better typesetting reading experience. If the link is broken, please click the button below to view the snapshot at that time.
neoserver,ios ssh client

树莓派命令行配置无线网络

树莓派版本： Raspberry Pi 4B

操作系统 ： Ubuntu Server 20.04_x64

使用 ip a 查看无线网卡名称：

ubuntu@ubuntu:~$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
    link/ether dc:a6:32:6b:bd:cf brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.147/24 brd 192.168.1.255 scope global dynamic eth0
       valid_lft 603225sec preferred_lft 603225sec
    inet6 fe80::dea6:32ff:fe6b:bdcf/64 scope link
       valid_lft forever preferred_lft forever
3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether dc:a6:32:6b:bd:d0 brd ff:ff:ff:ff:ff:ff
ubuntu@ubuntu:~$

eth0是有线网卡，wlan0是无线网卡，接下来改/etc/netplan/下的YAML配置文件，不同的机器文件名不一样 ：

ubuntu@ubuntu:~$ ls /etc/netplan/
50-cloud-init.yaml
ubuntu@ubuntu:~$ cat /etc/netplan/50-cloud-init.yaml
# This file is generated from information provided by the datasource.  Changes
# to it will not persist across an instance reboot.  To disable cloud-init's
# network configuration capabilities, write a file
# /etc/cloud/cloud.cfg.d/99-disable-network-config.cfg with the following:
# network: {config: disabled}
network:
    ethernets:
        eth0:
            dhcp4: true
            optional: true
    version: 2
ubuntu@ubuntu:~$

修改后的内容：

ubuntu@ubuntu:~$ cat /etc/netplan/50-cloud-init.yaml
# This file is generated from information provided by the datasource.  Changes
# to it will not persist across an instance reboot.  To disable cloud-init's
# network configuration capabilities, write a file
# /etc/cloud/cloud.cfg.d/99-disable-network-config.cfg with the following:
# network: {config: disabled}
network:
    ethernets:
        eth0:
            dhcp4: true
            optional: true
    version: 2

    wifis:
        wlan0:
            dhcp4: true
            access-points:
                "wifi的ssid":
                    password: "wifi密码"

ubuntu@ubuntu:~$

配置生效：

ubuntu@ubuntu:~$ sudo netplan try
ubuntu@ubuntu:~$ sudo netplan apply

本文github地址：

https://github.com/mike-zhang/mikeBlogEssays/blob/master/2020/20200529_树莓派命令行配置无线网络.rst


report

Recommend

About Joyk


Aggregate valuable and interesting links.
Joyk means Joy of geeK