用SQL查询分析实现类似金蝶K3的收发存明细表

使用SQL查询分析实现类收发存的报表，原始需求在另外一篇文章的第四部分。下图是实现需求。

fUjAVji.png!web

一、准备

删除临时表

[buy]判断是否存在临时表，存在则删除[/buy]

if OBJECT_ID('tempdb..#inv') is not null        
drop table #inv
if OBJECT_ID('tempdb..#t_mto') is not null        
drop table #t_MTO
if OBJECT_ID('tempdb..#t_mtoentry') is not null        
drop table #t_MTOEntry

判断是否存在需调整记录

[buy]判断采购申请单上是否存在需要调整的记录，存在则继续。

需要满足条件是：

1.采购申请单上存在MTO计划模式的物料，计划跟踪号不为999999；

2.库存中有可调整的物料。

那么库存中哪些是可以调整的物料呢？还得满足以下条件：

2.1批号为999999；

2.2计划跟踪号为空或者999999；

3.3无浮动计量单位的，基本库存数量要大于0，有浮动计量单位的，辅助数量和基本数量的库存均需大于0；

[/buy]

declare @finterid int = 1059
if exists (select f1 from (
     select case when (ti.FSecUnitID = 0 and t2.FQty > 0) OR (ti.FSecUnitID > 0 and t2.FQty > 0 and t2.FSecQty > 0 ) then 1 else 0 end as "F1"  
		 from  PORequestEntry t1
		 left join ICInventory t2 on t1.FItemID = t2.FItemID
		 left join t_ICItem ti on t1.FItemID = ti.FItemID
		 where t1.FInterID = @finterid
			and t1.FPlanMode = '14035'
			and t1.FMTONo <> '999999'
			and t2.FBatchNo = '999999'
			and t2.FMTONo in ('','999999')
	 ) as t where f1 = 1
)

二、开始

begin

寻找内码

查询mto调整单的内码

declare @maxNum int
	select @maxNum = FMaxNum from ICMaxNum where FTableName = 't_MTOChange'
	set @maxNum = @maxNum + 1
	update ICMaxNum set FMaxNum = @maxNum

构建表结构

将采购申请、存货表、需计算的字段进行联结，并构成临时表#inv

select 	
		t3.FBillNo,
		t1.FEntryID,
		t1.FDetailID,
		t1.FItemID,
		t1.FMTONo as "t1FMTONo",
		ti.FSecUnitID,
		t1.FQty as "t1FQty",
		t1.FCommitQty,
		t1.FUnitID,
		tm.FCoefficient,
		t1.FAuxCommitQty,
		t1.FAuxQty,
		t1.FSecQty as "t1FSecQty",
		t1.FSecCommitQty,
		t1.FOrderQty,
		t1.FMRPClosed,
		t1.FPlanMode,
		t1.FEntrySelfP0139, --辅助数量（计算）
		t1.FEntrySelfP0140, --关联数量
		t1.FEntrySelfP0141,  --关联标志
		t2.FStockID,
		t2.FStockPlaceID,
		t2.FKFPeriod,
		t2.FKFDate,
		t2.FQty as "t2FQty",
		t2.FSecQty as "t2FSecQty",
		case when t2.FSecQty > 0 then t2.FQty / t2.FSecQty else 0 end as "FSecCoefficient",
		t2.FBatchNo,
		t2.FMTONo as "t2FMTONo",
		CAST(null as int) as "FMTOInterID",
		CAST(null as decimal(28,10)) as "FChaQty",
		cast(null as decimal(28,10)) as "FMTOChange",
		cast(null as decimal(28,10)) as "FSumMTOChange",
		CAST(null as decimal(28,10)) as "FBegQty",
		CAST(null as decimal(28,10)) as "FEndQty",
		
		cast(null as decimal(28,10)) as "FSecChaQty",
		cast(null as decimal(28,10)) as "FSecMTOChange",
		cast(null as decimal(28,10)) as "FSecSumMTOChange",
		CAST(null as decimal(28,10)) as "FSecBegQty",
		CAST(null as decimal(28,10)) as "FSecEndQty",
	
		DENSE_RANK() OVER (ORDER BY t1.FItemID) AS RANK1,
		ROW_NUMBER() over (PARTITION by t1.FDetailID order By t1.FEntryID,t2.FMTONo,t2.FQty desc) RANK2

	 into #inv
	 from PORequestEntry t1
	 left join ICInventory t2 on t1.FItemID = t2.FItemID
	 left join t_ICItem ti on t1.FItemID = ti.FItemID
	 left join t_MeasureUnit tm on t1.FUnitID = tm.FMeasureUnitID
	 left join PORequest t3 on t1.FInterID =t3.FInterID
	 where t1.FInterID = @finterid
		and t1.FPlanMode = '14035'
		and t1.FMTONo <> '999999'
		and t2.FBatchNo = '999999'
		and t2.FMTONo in ('','999999')
		and t2.FQty > 0
		and ((ti.FSecUnitID = 0 and t2.FQty > 0) OR (ti.FSecUnitID > 0 and t2.FQty > 0 and t2.FSecQty > 0 ))

更新

更新#inv表的MTO调整单内码

update #inv set FMtoInterID = @maxNum

构建临时表

用来存放mto调整单的表头数据

create table #t_MTO(
		FID int,
		FClassTypeID int,
		FTranType int,
		FBillNo nvarchar(255),
		FDate datetime,
		FNote nvarchar(255),
		FBillerID int,
		FCheckDate datetime,
		FEmpID int,
		FCheckerID int,
		FDeptID int,
		FStatus smallint,
		FUpStockWhenSave bit,
		FPrintCount int,
		FSourceBillNo nvarchar(50),
		FSourceTranType int
	)

用来存放mto调整单的表体数据

create table #t_MTOEntry(
		FID int,
		FIndex int,
		FItemID int,
		FAuxPropID int,
		FBatchNo varchar(255),
		FStockID int,
		FSPID int,
		FBaseQty decimal(23,10),
		FSecUnitID int,
		FUnitID int,
		FQty decimal(23,10),
		FSecCoefficient decimal(23,10),
		FSecQty decimal(23,10),
		FChangeQty_Base decimal(23,10),
		FChangeQty decimal(23,10),
		FChangeSecQty decimal(23,10),
		FKFDate datetime,
		FKFPeriod int,
		FPeriodDate datetime,
		FFromMTONo nvarchar(50),
		FToMTONo nvarchar(50),
		FChangeBaseQty decimal(23,10),
		FSelectedProcID int,
		FEntrySupply int,
		FStockTypeID int,
		FMrpNo nvarchar(50)
	)

三、计算

declare @R1 int = 1
	declare @maxR int = (select MAX(RANK1) from #inv)
	while @R1 <= @maxR begin
		if OBJECT_ID('tempdb..#inv2') is not null        
		drop table #inv2
		select *,DENSE_RANK() OVER (ORDER BY FDetailID) AS RANK3 into #inv2 from #inv where RANK1 = @R1
		
		declare @FSecUnitID int = (select top(1) FSecUnitID from #inv2 where RANK1 = @R1)
		
		if @FSecUnitID = 0 begin --没有辅助单位的
			declare @R2 int = 1
			declare @maxR2 int = (select MAX(RANK2) from #inv2 where  RANK3 = 1)
			declare @FChaQty decimal(28,10) = (select t1FQty from #inv2 where  RANK2 = 1 and RANK3 = 1)
			while @R2 <= @maxR2 begin
				set @FChaQty = @FChaQty - (select t2FQty from #inv2 where RANK2 = @R2 and RANK3 = 1) 
				update #inv2 set FChaQty = @FChaQty where RANK2 = @R2 and RANK3 = 1
				if @FChaQty > 0 update #inv2 set FMTOChange = t2FQty where RANK2 = @R2 and RANK3 = 1
				if @FChaQty <=0 update #inv2 set FMTOChange = t2FQty + FChaQty where RANK2 = @R2 and RANK3 = 1
				update #inv2 set FSumMTOChange = (select SUM(FMTOChange) from #inv2 where RANK3 = 1 and FMTOChange > 0) where  RANK3 = 1
				update #inv2 set FMRPClosed = case when (FSumMTOChange - t1FQty >= 0 ) then 1 else 0 end where RANK3 = 1
				update #inv2 set FEndQty = t2FQty - FMTOChange where RANK3 = 1 and FMTOChange > 0
				update #inv2 set FEndQty = t2FQty where RANK3 = 1 and FMTOChange <= 0
				set @R2 = @R2 +1
			end

			declare @R3 int = 1
			declare @maxR3 int = (select MAX(RANK3) from #inv2)
			while @R3 <= @maxR3 begin
				
				declare @i int = 1
				declare @maxI int = (select MAX(rank2) from #inv2 where RANK3 = @R3)
				while @i <= @maxI begin
					update #inv2 set FBegQty = t2FQty where RANK2 = @i and RANK3 = 1
					update #inv2 set FBegQty = (select FEndQty from #inv2 where RANK2 = @i and RANK3 = @R3 and FEndQty >0) where RANK2 = @i and RANK3 = @R3+1
					set @i = @i + 1		
				end
				
				declare @R31 int = 2
				while @R31 <= @maxR3 begin
					
					declare @j int = (select min(RANK2) from #inv2 where FBegQty >0 and RANK3 = @R31)
					declare @maxJ int =  (select max(RANK2) from #inv2 where FBegQty >0 and RANK3 = @R31)
					declare @FChaQty2 decimal(28,10)= (select t1FQty from #inv2 where RANK2 = 1 and RANK3 = @R31)
					while @j <= @maxJ begin
						set @FChaQty2 = @FChaQty2 - (select FBegQty from #inv2 where RANK2 = @j and RANK3 = @R31)
						update #inv2 set FChaQty = @FChaQty2 where RANK2 = @j and RANK3 = @R31
						if @FChaQty2 > 0 update #inv2 set FMTOChange = FBegQty where RANK2 = @j and RANK3 = @R31
						if @FChaQty2 <=0 update #inv2 set FMTOChange = FBegQty + FChaQty where RANK2 = @j and RANK3 = @R31
						update #inv2 set FSumMTOChange = (select SUM(FMTOChange) from #inv2 where RANK3 = @R31 and FMTOChange >0) where  RANK3 = @R31 
						update #inv2 set FMRPClosed = case when (FSumMTOChange - t1FQty >= 0 ) then 1 else 0 end where RANK3 = @R31
						update #inv2 set FEndQty = FBegQty - FMTOChange where RANK3 = @R31 and FMTOChange > 0
						update #inv2 set FEndQty = FBegQty where RANK3 = @R31 and FMTOChange <= 0
						set @j = @j+1
					end 
					set @R31 = @R31 +1
				end
				set @R3 = @R3 + 1		
			end	
		end
		
		if @FSecUnitID >0 begin --有辅助单位的
			declare @R2s int = 1
			declare @maxR2s int = (select MAX(RANK2) from #inv2 where  RANK3 = 1)
			declare @FSecChaQty decimal(28,10) = (select FEntrySelfP0139 from #inv2 where  RANK2 = 1 and RANK3 = 1)
			while @R2s <= @maxR2s begin
				set @FSecChaQty = @FSecChaQty - (select t2FSecQty from #inv2 where RANK2 = @R2s and RANK3 = 1) 
				update #inv2 set FSecChaQty = @FSecChaQty where RANK2 = @R2s and RANK3 = 1
				if @FSecChaQty > 0 update #inv2 set FSecMTOChange = t2FSecQty where RANK2 = @R2s and RANK3 = 1
				if @FSecChaQty <=0 update #inv2 set FSecMTOChange = t2FSecQty + FSecChaQty where RANK2 = @R2s and RANK3 = 1
				update #inv2 set FSecSumMTOChange = (select SUM(FSecMTOChange) from #inv2 where RANK3 = 1 and FSecMTOChange > 0) where RANK3 = 1
				update #inv2 set FMRPClosed = case when (FSecSumMTOChange - FEntrySelfP0139 >= 0 ) then 1 else 0 end where RANK3 = 1
				update #inv2 set FSecEndQty = t2FSecQty - FSecMTOChange where RANK3 = 1 and FSecMTOChange > 0
				update #inv2 set FSecEndQty = t2FSecQty where RANK3 = 1 and FSecMTOChange <= 0
				
				update #inv2 set FMTOChange = FSecMTOChange * FSecCoefficient where RANK2 = @R2s and RANK3 = 1
				update #inv2 set FSumMTOChange = (select SUM(FMTOChange) from #inv2 where RANK3 = 1 and FMTOChange > 0) where RANK3 = 1
				update #inv2 set FEndQty = t2FQty - FMTOChange where RANK3 = 1 and FMTOChange > 0
				update #inv2 set FEndQty = t2FQty where RANK3 = 1 and FMTOChange <= 0
				set @R2s = @R2s +1
			end

			declare @R3s int = 1
			declare @maxR3s int = (select MAX(RANK3) from #inv2)
			while @R3s <= @maxR3s begin
				
				declare @is int = 1
				declare @maxIs int = (select MAX(rank2) from #inv2 where RANK3 = @R3s)
				while @is <= @maxIs begin
					update #inv2 set FSecBegQty = t2FSecQty where RANK2 = @is and RANK3 = 1
					update #inv2 set FSecBegQty = (select FSecEndQty from #inv2 where RANK2 = @is and RANK3 = @R3s and FSecEndQty >0) where RANK2 = @is and RANK3 = @R3s+1
					
					update #inv2 set FBegQty = t2FQty where RANK2 = @is and RANK3 = 1
					update #inv2 set FBegQty = (select FEndQty from #inv2 where RANK2 = @is and RANK3 = @R3s and FEndQty >0) where RANK2 = @is and RANK3 = @R3s+1
					set @is = @is + 1		
				end
				
				declare @R31s int = 2
				while @R31s <= @maxR3s begin
					
					declare @js int = (select min(RANK2) from #inv2 where FSecBegQty >0 and RANK3 = @R31s)
					declare @maxJs int =  (select max(RANK2) from #inv2 where FSecBegQty >0 and RANK3 = @R31s)
					declare @FSecChaQty2 decimal(28,10)= (select FEntrySelfP0139 from #inv2 where RANK2 = 1 and RANK3 = @R31s)
					while @js <= @maxJs begin
						set @FSecChaQty2 = @FSecChaQty2 - (select FSecBegQty from #inv2 where RANK2 = @js and RANK3 = @R31s)
						update #inv2 set FSecChaQty = @FSecChaQty2 where RANK2 = @js and RANK3 = @R31s
						if @FSecChaQty2 > 0 update #inv2 set FSecMTOChange = FSecBegQty where RANK2 = @js and RANK3 = @R31s
						if @FSecChaQty2 <=0 update #inv2 set FSecMTOChange = FSecBegQty + FSecChaQty where RANK2 = @js and RANK3 = @R31s
						update #inv2 set FSecSumMTOChange = (select SUM(FSecMTOChange) from #inv2 where RANK3 = @R31s and FSecMTOChange >0) where RANK3 = @R31s
						update #inv2 set FMRPClosed = case when (FSecSumMTOChange - FEntrySelfP0139 >= 0 ) then 1 else 0 end where RANK3 = @R31s
						update #inv2 set FSecEndQty = FSecBegQty - FSecMTOChange where RANK3 = @R31s and FSecMTOChange > 0
						update #inv2 set FSecEndQty = FSecBegQty where RANK3 = @R31s and FSecMTOChange <= 0
						
						update #inv2 set FMTOChange = FSecMTOChange * FSecCoefficient where RANK2 = @js and RANK3 = @R31s
						update #inv2 set FSumMTOChange = (select SUM(FMTOChange) from #inv2 where RANK3 = @R31s and FMTOChange > 0 ) where RANK3 = @R31s
						update #inv2 set FEndQty = FBegQty - FMTOChange where RANK3 = @R31s and FMTOChange > 0
						update #inv2 set FEndQty = FBegQty where RANK3 = @R31s and FMTOChange <= 0
						set @js = @js+1
					end 
					set @R31s = @R31s +1
				end
				set @R3s = @R3s + 1		
			end	
		end
		
		select * from #inv2

四、结束

反写采购申请明细表

update te set 
			te.FMRPClosed = ti.FMRPClosed,
			te.FCommitQty = ti.FSumMTOChange,
			te.FAuxCommitQty = ti.FSumMTOChange / ti.FCoefficient,
			te.FSecCommitQty = case when ti.FSecSumMTOChange IS null then 0 else ti.FSecSumMTOChange end,
			te.FOrderQty = ti.FSumMTOChange,
			te.FEntrySelfP0140 = case when ti.FSecUnitID = 0 then ti.FSumMTOChange else ti.FSecSumMTOChange end,
			te.FEntrySelfP0141 = 1
			from PORequestEntry te,#inv2 ti where te.FDetailID = ti.FDetailID

插入MTO单据体临时表

insert into #t_MTOEntry 
			select 
			FMTOInterID,
			'' as "FIndex",
			FItemID,
			'0' as "FAuxPropID",
			FBatchNo,
			FStockID,
			FStockPlaceID,
			FBegQty,
			null as "FSecUnitID",
			FUnitID,
			FBegQty / FCoefficient as "FQty",
			FSecCoefficient,
			case when FSecBegQty is null then 0 else FSecBegQty end as "FSecQty",
			'0' as FChangeQty_Base,
			FMTOChange / FCoefficient as "FChangeQty",
			case when FSecMTOChange is null then 0 else FSecMTOChange end as "FChangeSecQty",
			case when (FKFDate = '') then null else FKFDate end AS "FKFDate",
			FKFPeriod,
			case when (FKFDate = '') then null else FKFDate + FKFPeriod end AS "FPeriodDate",
			t2FMTONo,
			t1FMTONo,
			FMTOChange,
			'',
			'',
			'',
			''
		    from #inv2 where FMTOChange > 0 
		set @R1 = @R1+1
	end

插入MTO单据头临时表

insert into #t_MTO 
			select 
			FMTOInterID,
			1107011,
			1107011,
			'MTOAUTO'+LTRIM(str(FMTOInterID)),
			CONVERT(varchar(10),getdate(),23)+' 00:00:00.000',
			'',
			16394,
			GETDATE(),
			2649,
			16394,
			277,
			1,
			0,
			0,
			FBillNo,
			70
			from #inv2

插入数据表

insert into t_MTOChange select * from #t_MTO
	insert into t_MTOChangeEntry select * from #t_MTOEntry

插入审批流

Insert Into ICClassCheckRecords1107011(FPage,FBillID,FBillEntryID,FBillNo, FBillEntryIndex,FCheckLevel,FCheckLevelTo,FMode,FCheckMan, FCheckIdea,FCheckDate,FDescriptions)  
		Values (1,@maxnum,0,'MTOAUTO'+ltrim(str(@maxnum)),0,-99,-1,0,16394,'',GetDate(),'审核')
	Insert Into ICClassCheckRecords1107011(FPage,FBillID,FBillEntryID,FBillNo, FBillEntryIndex,FCheckLevel,FCheckLevelTo,FMode,FCheckMan, FCheckIdea,FCheckDate,FDescriptions)  
		Values (1,@maxnum,0,'MTOAUTO'+ltrim(str(@maxnum)),0,-1,1,0,16394,'',GetDate(),'审核')

校对即时库存

EXEC CheckInventory

更新采购申请单单据头MTO内码

update PORequest set FChildren = FChildren + 1,FHeadSelfP0134 = @maxNum where FInterID = @finterid

结束

end

一、准备

删除临时表

判断是否存在需调整记录

二、开始

寻找内码

构建表结构

更新

构建临时表

三、计算

四、结束

反写采购申请明细表

插入MTO单据体临时表

插入MTO单据头临时表

插入数据表

插入审批流

校对即时库存

结束

Recommend

再深一点：面试工作两不误，源码级理解Spring事务

A janet web framework

王团长区块链日记896篇：你们啥时候进圈的？

人工智能创作的内容版权归谁？

DeepFake 新高度：一阶运动模型让“万物皆可动”

深度学习模型那么多，科学研究选哪个？

疫情后的首个转会窗口，或许比想象中还要艰难

2020 GMIC赵明演讲：好产品不愁卖！荣耀30系列已紧握5G时代脉搏

当当回应李国庆夺章:俞渝很平静望他离当当越远越好

李国庆率四大汉赴当当“怒抢公章”

About Joyk